home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BMUG Revelations
/
BMUG Revelations.toast
/
Programming
/
Programming Languages
/
XLisp 2.1e3
/
xlisp docs
< prev
Wrap
Text File
|
1992-10-29
|
199KB
|
5,239 lines
XLISP-PLUS: Another Object-oriented Lisp
Version 2.1e
September 11, 1992
Tom Almy
tom.almy@tek.com
Portions of this manual and software are from XLISP which is Copyright (c)
1988, by David Michael Betz, all rights reserved. Mr. Betz grants
permission for unrestricted non-commercial use. Portions of XLISP-PLUS from
XLISP-STAT are Copyright (c) 1988, Luke Tierney. UNIXSTUF.C is from Winterp
1.0, Copyright 1989 Hewlett-Packard Company (by Niels Mayer). Other
enhancements and bug fixes are provided without restriction by Tom Almy,
Mikael Pettersson, Neal Holtz, Johnny Greenblatt, Ken Whedbee, Blake
McBride, and Pete Yadlowsky. See source code for details.
Table of Contents
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
XLISP COMMAND LOOP . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BREAK COMMAND LOOP . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DATA TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
THE EVALUATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HOOK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
LEXICAL CONVENTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8 BIT ASCII CHARACTERS . . . . . . . . . . . . . . . . . . . . . . . . 11
READTABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SYMBOL CASE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LAMBDA LISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
OBJECTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
EVALUATION FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 24
SYMBOL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PROPERTY LIST FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . 30
HASH TABLE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 31
ARRAY FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SEQUENCE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 33
LIST FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DESTRUCTIVE LIST FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . 42
ARITHMETIC FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 43
BITWISE LOGICAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . 48
STRING FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
CHARACTER FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 51
STRUCTURE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 53
XLISP 2.1e Table of Contents
OBJECT FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PREDICATE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 57
CONTROL CONSTRUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . 61
LOOPING CONSTRUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . 64
THE PROGRAM FEATURE . . . . . . . . . . . . . . . . . . . . . . . . . . 65
INPUT/OUTPUT FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . 67
THE FORMAT FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . 69
FILE I/O FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 71
STRING STREAM FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . 75
DEBUGGING AND ERROR HANDLING FUNCTIONS . . . . . . . . . . . . . . . . 77
SYSTEM FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
ADDITIONAL FUNCTIONS AND UTILITIES . . . . . . . . . . . . . . . . . . 84
BUG FIXES AND EXTENSIONS . . . . . . . . . . . . . . . . . . . . . . . 88
EXAMPLES: FILE I/O FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 96
INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
XLISP 2.1e INTRODUCTION Page 1
INTRODUCTION
XLISP-PLUS is an enhanced version of David Michael Betz's XLISP to have
additional features of Common Lisp. XLISP-PLUS is distributed for the IBM-
PC family and for UNIX, but can be easily ported to other platforms.
Complete source code is proved (in "C") to allow easy modification and
extension.
Since XLISP-PLUS is based on XLISP, most XLISP programs will run on XLISP-
PLUS. Since XLISP-PLUS incorporates many more features of Common Lisp, many
small Common Lisp applications will run on XLISP-PLUS with little
modification. See the section starting on page 88 for details of the
differences between XLISP and XLISP-PLUS.
Many Common Lisp functions are built into XLISP-PLUS. In addition, XLISP
defines the objects 'Object' and 'Class' as primitives. 'Object' is the
only class that has no superclass and hence is the root of the class
heirarchy tree. 'Class' is the class of which all classes are instances (it
is the only object that is an instance of itself).
This document is a brief description of XLISP-PLUS. It assumes some
knowledge of LISP and some understanding of the concepts of object-oriented
programming.
You will probably also need a copy of "Common Lisp: The Language" by Guy L.
Steele, Jr., published by Digital Press to use as a reference for some of
the Common Lisp functions that are described only briefly in this document.
XLISP-PLUS has a number of compilation options to to eliminate groups of
functions and to tailor itself to various environments. Unless otherwise
indicated this manual assumes all options are enabled and the system
dependent code is as complete as that provided for the MS/DOS environment.
Assistance for using or porting XLISP-PLUS can be obtained on the USENET
newsgroup comp.lang.lisp.x, or by writing to Tom Almy at the Internet
address toma@sail.labs.tek.com. You can also reach Tom by writing to him at
17830 SW Shasta Trail, Tualatin, OR 97062, USA.
XLISP 2.1e XLISP COMMAND LOOP Page 2
XLISP COMMAND LOOP
When XLISP is started, it first tries to load the workspace "xlisp.wks", or
an alternative file specified with the "-wfilename" option, from the
current directory. If that file doesn't exist, or the "-w" flag is in the
command line, XLISP builds an initial workspace, empty except for the
built-in functions and symbols.
Then, providing providing no workspace file was loaded, XLISP attempts to
load "init.lsp" from the current directory. It then loads any files named
as parameters on the command line (after appending ".lsp" to their names).
If the "-v" flag is in the command line, then the files are loaded
verbosely. The option "-tfilename" will open a transcript file of the name
"filename".
XLISP then issues the following prompt (unless standard input has been
redirected):
>
This indicates that XLISP is waiting for an expression to be typed.
When a complete expression has been entered, XLISP attempts to evaluate
that expression. If the expression evaluates successfully, XLISP prints the
result and then returns for another expression.
The following control characters can be used while XLISP is waiting for
input:
Backspace delete last character
Del delete last character
tab tabs over (treated as space by XLISP reader)
ctrl-C goto top level
ctrl-G cleanup and return one level
ctrl-Z end of file (returns one level or exits program)
ctrl-P proceed (continue)
ctrl-T print information
Under MS-DOS the following control characters can be typed while XLISP is
executing (providing standard input has not been redirected away from the
console):
ctrl-B BREAK -- enter break loop
ctrl-S Pause until another key is struck
ctrl-C go to top level (if lucky: ctrl-B,ctrl-C is safer)
ctrl-T print information
Under MS-DOS if the global variable *dos-input* is set non-NIL, DOS is used
to read entire input lines. Operation this way is convenient if certain DOS
utilities, such as CED, are used, or if XLISP is run under an editor like
XLISP 2.1e XLISP COMMAND LOOP Page 3
EPSILON. In this case, normal command line editing is available, but the
control keys will not work (in particular, ctrl-C will cause the program to
exit!). Use the XLISP functions top-level, clean-up, and continue instead
of ctrl-C, ctrl-G, and ctrl-P.
XLISP 2.1e BREAK COMMAND LOOP Page 4
BREAK COMMAND LOOP
When XLISP encounters an error while evaluating an expression, it attempts
to handle the error in the following way:
If the symbol '*breakenable*' is true, the message corresponding to the
error is printed. If the error is correctable, the correction message is
printed.
If the symbol '*tracenable*' is true, a trace back is printed. The number
of entries printed depends on the value of the symbol '*tracelimit*'. If
this symbol is set to something other than a number, the entire trace back
stack is printed.
XLISP then enters a read/eval/print loop to allow the user to examine the
state of the interpreter in the context of the error. This loop differs
from the normal top-level read/eval/print loop in that if the user invokes
the function 'continue', XLISP will continue from a correctable error. If
the user invokes the function 'clean-up', XLISP will abort the break loop
and return to the top level or the next lower numbered break loop. When in
a break loop, XLISP prefixes the break level to the normal prompt.
If the symbol '*breakenable*' is NIL, XLISP looks for a surrounding errset
function. If one is found, XLISP examines the value of the print flag. If
this flag is true, the error message is printed. In any case, XLISP causes
the errset function call to return NIL.
If there is no surrounding errset function, XLISP prints the error message
and returns to the top level.
If XLISP was invoked with the command line argument "-b" then XLISP assumes
it is running in batch mode. In batch mode any uncaught error will cause
XLISP to exit after printing the error message.
XLISP 2.1e DATA TYPES Page 5
DATA TYPES
There are several different data types available to XLISP-PLUS programmers.
Typical implementation limits are shown for 32 bit word systems. Values in
square brackets apply to 16 bit MS-DOS implementations.
All data nodes are effectively cons cells consisting of two pointers and
and one or two bytes of identification flags (9 or 10 bytes per cell). Node
space is managed and garbage collected by XLISP. Array and string storage
is either allocated by the C runtime or managed and garbaged collected by
XLISP (compilation option). If C does the allocation, memory fragmentation
can occur. Fragmentation can be eliminated by saving the image and
restarting XLISP-PLUS.
˘ NIL
Unlike the original XLISP, NIL is a symbol (although not in the
*obarray*), to allowing setting its properties.
˘ lists
Either NIL or a CDR-linked list of cons cells, terminated by a symbol
(typically NIL). Circular lists are allowable, but can cause problems
with some functions so they must be used with care.
˘ arrays
The CDR field of an array points to the dynamically allocated data
array, while the CAR contains the integer length of the array.
Elements in the data array are pointers to other cells [Size limited
to about 16360].
˘ character strings
Implemented like arrays, except string array is byte indexed and
contains the actual characters. Note that unlike the underlying C, the
null character (value 0) is valid. [Size limited to about 65500]
˘ symbols
Implemented as a 4 element array. The elements are value cell,
function cell, property list, and print name (a character string
node). Print names are limited to 100 characters. There are also flags
for constant and special. Values bound to special symbols (declared
with DEFVAR or DEFPARAMETER) are always dynamically bound, rather than
being lexically bound.
˘ fixnums (integers)
Small integers (> -129 and <256) are statically allocated and are thus
always EQ integers of the same value. The CAR field is used to hold
the value, which is a 32 bit signed integer.
˘ ratios
The CAR field is used to hold the numerator while the CDR field is
used to hold the denominator. The numerator is a 32 bit signed value
while the denominator is a 31 bit positive value.
˘ characters
All characters are statically allocated and are thus EQ characters of
the same value. The CAR field is used to hold the value. In XLISP
characters are "unsigned" and thus range in value from 0 to 255.
XLISP 2.1e DATA TYPES Page 6
˘ flonums (floating point numbers)
The CAR and CDR fields hold the value, which is typically a 64 bit
IEEE floating point number.
˘ complex numbers
Part of the math extension compilation option. Internally implemented
as an array of the real and imaginary parts. The parts can be either
both fixnums or both flonums. Any function which would return an
fixnum complex number with a zero imaginary part returns just the
fixnum.
˘ objects
Implemented as an array of instance variable count plus one elements.
The first element is the object's class, while the remaining arguments
are the instance variables.
˘ streams (file)
The CAR and CDR fields are used in a system dependent way as a file
pointer.
˘ streams (unnamed -- string)
Implemented as a tconc-style list of characters.
˘ subrs (built-in functions)
The CAR field points to the actual code to execute, while the CDR
field is an internal pointer to the name of the function.
˘ fsubrs (special forms)
Same implementation as subrs.
˘ closures (user defined functions)
Implemented as an array of 11 elements:
1. name symbol or NIL
2. 'lambda or 'macro
3. list of required arguments
4. optional arguments as list of (<arg> <init> <specified-p>)
triples.
5. &rest argument
6. &key arguments as list of (<key> <arg> <init> <specified-p>)
quadruples.
7. &aux arguments as list of (<arg> <init>) pairs.
8. function body
9. value environment (see page 78 for format)
10. function environment
11. argument list (unprocessed)
˘ structures
Implemented as an array with first element being a pointer to the
structure name string, and the remaining elements being the structure
elements.
˘ hash-tables
Implemented as a structure of varying length with no generalized
accessing functions, but with a special print function (print
functions not available for standard structures).
˘ random-states
Implemented as a structure with a single element which is the random
state (here a fixnum, but could change without impacting xlisp
programs).
XLISP 2.1e THE EVALUATOR Page 7
THE EVALUATOR
The process of evaluation in XLISP:
Strings, characters, numbers of any type, objects, arrays, structures,
streams, subrs, fsubrs and closures evaluate to themselves.
Symbols act as variables and are evaluated by retrieving the value
associated with their current binding.
Lists are evaluated by examining the first element of the list and then
taking one of the following actions:
If it is a symbol, the functional binding of the symbol is retrieved.
If it is a lambda expression, a closure is constructed for the
function described by the lambda expression.
If it is a subr, fsubr or closure, it stands for itself.
Any other value is an error.
Then, the value produced by the previous step is examined:
If it is a subr or closure, the remaining list elements are evaluated
and the subr or closure is applied to these evaluated expressions.
If it is an fsubr, the fsubr is called with the remaining list
elements as arguments (unevaluated).
If it is a macro, the macro is expanded with the remaining list
elements as arguments (unevaluated). The macro expansion is then
evaluated in place of the original macro call. If the symbol
*displace-macros* is not NIL, then the expanded macro will
(destructively) replace the original macro expression. This means that
the macro will only be expanded once, but the original code will be
lost. The displacement will not take place unless the macro expands
into a list. The standard XLISP practice is the macro will be expanded
each time the expression is evaluated, which negates some of the
advantages of using macros.
XLISP 2.1e HOOK FUNCTIONS Page 8
HOOK FUNCTIONS
The evalhook and applyhook facility are useful for implementing debugging
programs or just observing the operation of XLISP. It is possible to
control evaluation of forms in any context.
If the symbol '*evalhook*' is bound to a function closure, then every call
of eval will call this function. The function takes two arguements, the
form to be evaluated and execution environment. During the execution of
this function, *evalhook* (and *applyhook*) are dynamically bound to NIL to
prevent undesirable recursion. This "hook" function returns the result of
the evaluation.
If the symbol '*applyhook*' is bound to a function, then every function
application within an eval will call this function (note that the function
apply, and others which do not use eval, will not invoke the apply hook
function). The function takes two arguments, the function closure and the
argument list (which is already evaluated). During execution of this hook
function, *applyhook* (and *evalhook*) are dynamically bound to NIL to
prevent undesired recursion. This function is to return the result of the
function application.
Note that the hook functions cannot reset *evalhook* or *applyhook* to NIL,
because upon exit these values will be reset. An excape mechanism is
provided -- execution of 'top-level', or any error that causes return to
the top level, will unhook the functions. Applications should bind these
values either via 'progv', 'evalhook', or 'applyhook'.
The functions 'evalhook' and 'applyhook' allowed for controlled application
of the hook functions. The form supplied as an argument to 'evalhook', or
the function application given to 'applyhook', are not hooked themselves,
but any subsidiary forms and applications are. In addition, by supplying
NIL values for the hook functions, 'evalhook' can be used to execute a form
within a specific environment passed as an argument.
An additional hook function exists for the garbage collector. If the symbol
'*gc-hook*' is bound to a function, then this function is called after
every garbage collection. The function has two arguments. The first is the
total number of nodes, and the second is the number of nodes free. The
return value is ignored. During the execution of the function, *gc-hook* is
dynamically bound to NIL to prevent undesirable recursion.
XLISP 2.1e LEXICAL CONVENTIONS Page 9
LEXICAL CONVENTIONS
The following conventions must be followed when entering XLISP programs:
Comments in XLISP code begin with a semi-colon character and continue to
the end of the line.
Except when escape sequences are used, symbol names in XLISP can consist of
any sequence of non-blank printable characters except the terminating macro
characters:
( ) ' ` , " ;
and the escape characters:
\ |
In addition, the first character may not be '#' (non-terminating macro
character), nor may the symbol have identical syntax with a numeric
literal. Uppercase and lowercase characters are not distinguished within
symbol names because, by default, lowercase characters are mapped to
uppercase on input.
Any printing character, including whitespace, may be part of a symbol name
when escape characters are used. The backslash escapes the following
character, while multiple characters can be escaped by placing them between
vertical bars. At all times the backslash must be used to escape either
escape characters.
For semantic reasons, certain chararacter sequences should/can never be
used as symbols in XLISP. A single period is used to denote dotted lists.
The symbol NIL represents an empty list. Symbols starting with a colon are
keywords, and will always evaluate to themselves. Thus they should not be
used as regular symbols. The symbol T is also reserved for use as the truth
value.
Fixnum (integer) literals consist of a sequence of digits optionally
beginning with a sign ('+' or '-'). The range of values an integer can
represent is limited by the size of a C 'long' on the machine on which
XLISP is running.
Ratio literals consist of two integer literals separated by a slash
character ('/'). The second number, the denominator, must be positive.
Ratios are automatically reduced to their cannonical form; if they are
integral, then they are reduced to an integer.
Flonum (floating point) literals consist of a sequence of digits optionally
beginning with a sign ('+' or '-') and including one or both of an embedded
decimal point or a trailing exponent. The optional exponent is denoted by
an 'E' or 'e' followed by an optional sign and one or more digits. The
XLISP 2.1e LEXICAL CONVENTIONS Page 10
range of values a floating point number can represent is limited by the
size of a C 'double' on most machines on which XLISP is running.
Numeric literals cannot have embedded escape characters. If they do, they
are treated as symbols. Thus '12\3' is a symbol even though it would appear
to be identical to '123'.
Complex literals are constructed using a read-macro of the format #C(r i),
where r is the real part and i is the imaginary part. The numeric fields
can be any valid fixnum, ratio, or flonum literal. If either field has a
ratio or flonum literal, then both values are converted to flonums. Fixnum
complex literals with a zero imaginary part are automatically reduced to
fixnums.
Character literals are handled via the #\ read-macro construct:
#\<char> == the ASCII code of the printing character
#\newline == ASCII linefeed character
#\space == ASCII space character
#\rubout == ASCII rubout (DEL)
#\C-<char> == ASCII control character
#\M-<char> == ASCII character with msb set (Meta character)
#\M-C-<char> == ASCII control character with msb set
Literal strings are sequences of characters surrounded by double quotes
(the " read-macro). Within quoted strings the '\' character is used to
allow non-printable characters to be included. The codes
recognized are:
\\ means the character '\'
\n means newline
\t means tab
\r means return
\f means form feed
\nnn means the character whose octal code is nnn
XLISP 2.1e 8 BIT ASCII CHARACTERS Page 11
8 BIT ASCII CHARACTERS
When used in an IBM PC environment (or perhaps others), XLISP-PLUS is
compiled by default to allow the full use of the IBM 8 bit ASCII character
set, including all characters with diacritic marks. Note that using such
characters will make programs non-portable. XLISP-PLUS can be compiled for
standard 7 bit ASCII if desired for portability.
When 8 bit ASCII is enabled, the following system characteristics change:
Character codes 128 to 254 are marked as :constituent in the readtable.
This means that any of the new characters (except for the nonprinting
character 255) can be symbol constituent. Alphabetic characters which
appear in both cases, such as Ç and ê, are considered to be alphabetical
for purposes of symbol case control, while characters such as † that have
no coresponding upper case are not considered to be alphabetical.
The reader is extended for the character data type to allow all the
additional characters (except code 255) to be entered literally, for
instance "#\Ç". These characters are also printed literally, rather than
using the "M-" construct. Code 255 must still be entered as, and will be
printed as, "#\M-Rubout".
Likewise strings do not need and will not use the backslash escape
mechanism for codes 128 to 254.
The functions alphanumericp, alpha-char-p, upper-case-p, and lower-case-p
perform as would be expected on the extended characters, treating the
diacritic characters as their unadorned counterparts. As per the Common
Lisp definition, both-case-p will only indicate T for characters available
in both cases.
XLISP 2.1e READTABLES Page 12
READTABLES
The behaviour of the reader is controlled by a data structure called a
"readtable". The reader uses the symbol *readtable* to locate the current
readtable. This table controls the interpretation of input characters -- if
it is changed then the section LEXICAL CONVENTIONS may not apply. The
readtable is an array with 256 entries, one for each of the extended ASCII
character codes. Each entry contains one of the following values, with the
initial entries assigned to the values indicated:
:white-space A whitespace character - tab, cr, lf, ff, space
(:tmacro . fun) terminating readmacro - ( ) " , ; ' `
(:nmacro . fun) non-terminating readmacro - #
:sescape Single escape character - \
:mescape Multiple escape character - |
:constituent Indicating a symbol constituent (all printing
characters not listed above)
NIL Indicating an invalid character (everything else)
In the case of :TMACRO and :NMACRO, the "fun" component is a function. This
can either be a built-in readmacro function or a lambda expression. The
function takes two parameters. The first is the input stream and the second
is the character that caused the invocation of the readmacro. The readmacro
function should return NIL to indicate that the character should be treated
as white space or a value consed with NIL to indicate that the readmacro
should be treated as an occurance of the specified value. Of course, the
readmacro code is free to read additional characters from the input stream.
A :nmacro is a symbol constituent except as the first character of a
symbol.
As an example, the following read macro allows the square brackets to be
used as a more visibly appealing alternative to the SEND function:
(setf (aref *readtable* (char-int #\[)) ; #\[ table entry
(cons :tmacro
(lambda (f c &aux ex) ; second arg is not used
(do ()
((eq (peek-char t f) #\]))
(setf ex (append ex (list (read f)))))
(read-char f) ; toss the trailing #\]
(cons (cons 'send ex) NIL))))
(setf (aref *readtable* (char-int #\]))
(cons :tmacro
(lambda (f c)
(error "misplaced right bracket"))))
XLISP 2.1e READTABLES Page 13
XLISP defines several useful read macros:
'<expr> == (quote <expr>)
`<expr> == (backquote <expr>)
,<expr> == (comma <expr>)
,@<expr> == (comma-at <expr>)
#'<expr> == (function <expr>)
#(<expr>...) == an array of the specified expressions
#S(<structtype> [<slotname> <value>]...)
== structure of specified type and initial values
#.<expr> == result of evaluating <expr>
#x<hdigits> == a hexadecimal number (0-9,A-F)
#o<odigits> == an octal number (0-7)
#b<bdigits> == a binary number (0-1)
#| |# == a comment
#:<symbol> == an uninterned symbol
#C(r i) == a complex number
#+<expr> == conditional on feature expression true
#-<expr> == conditional on feature expression false
A feature expression is either a symbol or a list where the first element
is AND, OR, or NOT and any remaining elements (NOT requires exactly one)
are feature expressions. A symbol is true if it is a member (by test
function EQ) of the list in global variable *FEATURES*. Init.lsp defines
one initial feature, :XLISP. Utility files supplied with XLISP-PLUS
generally add new features which are EQ to the keyword made from their file
names.
XLISP 2.1e SYMBOL CASE CONTROL Page 14
SYMBOL CASE CONTROL
XLISP-PLUS uses two variables, *READTABLE-CASE* and *PRINT-CASE* to
deturmine case conversion during reading and printing of symbols.
*READTABLE-CASE* can have the values :UPCASE :DOWNCASE :PRESERVE or
:INVERT, while *PRINT-CASE* can have the values :UPCASE or :DOWNCASE. By
default, or when other values have been specified, both are :UPCASE.
When *READTABLE-CASE* is :UPCASE, all unescaped lowercase characters are
converted to uppercase when read. When it is :DOWNCASE, all unescaped
uppercase characters are converted to lowercase. This mode is not very
useful because the predefined symbols are all uppercase and would need to
be escaped to read them. When *READTABLE-CASE* is :PRESERVE, no conversion
takes place. This allows case sensitive input with predefined functions in
uppercase. The final choice, :INVERT, will invert the case of any symbol
that is not mixed case. This provides case sensitive input while making the
predefined functions and variables appear to be in lowercase.
The printing of symbols involves the settings of both *READTABLE-CASE* and
*PRINT-CASE*. When *READTABLE-CASE* is :UPCASE, lowercase characters are
escaped (unless PRINC is used), and uppercase characters are printed in the
case specified by *PRINT-CASE*. When *READTABLE-CASE* is :DOWNCASE,
uppercase characters are escaped (unless PRINC is used), and lowercase are
printed in the case specified by *PRINT-CASE*. The remaining
*READTABLE-CASE* modes ignore *PRINT-CASE* and do not escape alphabetic
characters. :PRESERVE never changes the case of characters while :INVERT
inverts the case of any non mixed-case symbols.
There are four major useful combinations of these modes:
A: *READTABLE-CASE* :UPCASE *PRINT-CASE* :UPCASE
"Traditional" mode. Case insensitive input; must escape to put lowercase
characters in symbol names. Symbols print exactly as they are stored, with
lowercase characters escaped when PRIN1 is used.
B: *READTABLE-CASE* :UPCASE *PRINT-CASE* :DOWNCASE
"Eyesaver" mode. Case insensitive input; must escape to put lowercase
characters in symbol name. Symbols print entirely in lowercase except
symbols escaped when lowercase characters present with PRIN1.
C: *READTABLE-CASE* :PRESERVE
"Oldfashioned case sensitive" mode. Case sensitive input. Predefined
symbols must be typed in uppercase. No alpha quoting needed. Symbols print
exactly as stored.
XLISP 2.1e SYMBOL CASE CONTROL Page 15
D: *READTABLE-CASE* :INVERT
"Modern case sensitive" mode. Case sensitive input. Predefined symbols must
be typed in lowercase. Alpha quoting should be avoided. Predefined symbols
print in lower case, other symbols print as they were entered.
As far as compatibility between these modes are concerned, data printed in
mode A can be read in A, B, or C. Data printed in mode B can be read in A,
B, and D. Data printed in mode C can be read in mode C, and if no lowercase
symbols in modes A and B as well. Data printed in mode D can be read in
mode D, and if no (internally) lowercase symbols in modes A and B as well.
In addition, symbols containing characters requiring quoting are compatible
among all modes.
XLISP 2.1e LAMBDA LISTS Page 16
LAMBDA LISTS
There are several forms in XLISP that require that a "lambda list" be
specified. A lambda list is a definition of the arguments accepted by a
function. There are four different types of arguments.
The lambda list starts with required arguments. Required arguments must be
specified in every call to the function.
The required arguments are followed by the &optional arguments. Optional
arguments may be provided or omitted in a call. An initialization
expression may be specified to provide a default value for an &optional
argument if it is omitted from a call. If no initialization expression is
specified, an omitted argument is initialized to NIL. It is also possible
to provide the name of a 'supplied-p' variable that can be used to
determine if a call provided a value for the argument or if the
initialization expression was used. If specified, the supplied-p variable
will be bound to T if a value was specified in the call and NIL if the
default value was used.
The &optional arguments are followed by the &rest argument. The &rest
argument gets bound to the remainder of the argument list after the
required and &optional arguments have been removed.
The &rest argument is followed by the &key arguments. When a keyword
argument is passed to a function, a pair of values appears in the argument
list. The first expression in the pair should evaluate to a keyword symbol
(a symbol that begins with a ':'). The value of the second expression is
the value of the keyword argument. Like &optional arguments, &key arguments
can have initialization expressions and supplied-p variables. In addition,
it is possible to specify the keyword to be used in a function call. If no
keyword is specified, the keyword obtained by adding a ':' to the beginning
of the keyword argument symbol is used. In other words, if the keyword
argument symbol is 'foo', the keyword will be ':foo'. Extra keywords will
signal an error unless &allow-other-keys is present, in which case the
extra keywords are ignored. In XLISP, the &allow-other-keys argument is
ignored, and extra keywords are ignored.
The &key arguments are followed by the &aux variables. These are local
variables that are bound during the evaluation of the function body. It is
possible to have initialization expressions for the &aux variables.
XLISP 2.1e LAMBDA LISTS Page 17
Here is the complete syntax for lambda lists:
(<rarg>...
[&optional [<oarg> | (<oarg> [<init> [<svar>]])]...]
[&rest <rarg>]
[&key
[<karg> | ([<karg> | (<key> <karg>)] [<init> [<svar>]])] ...
[&allow-other-keys]]
[&aux [<aux> | (<aux> [<init>])]...])
where:
<rarg> is a required argument symbol
<oarg> is an &optional argument symbol
<rarg> is the &rest argument symbol
<karg> is a &key argument symbol
<key> is a keyword symbol (starts with ':')
<aux> is an auxiliary variable symbol
<init> is an initialization expression
<svar> is a supplied-p variable symbol
XLISP 2.1e OBJECTS Page 18
OBJECTS
Definitions:
˘ selector - a symbol used to select an appropriate method
˘ message - a selector and a list of actual arguments
˘ method - the code that implements a message
Since XLISP was created to provide a simple basis for experimenting with
object-oriented programming, one of the primitive data types included is
'object'. In XLISP, an object consists of a data structure containing a
pointer to the object's class as well as an array containing the values of
the object's instance variables.
Officially, there is no way to see inside an object (look at the values of
its instance variables). The only way to communicate with an object is by
sending it a message.
You can send a message to an object using the 'send' function. This
function takes the object as its first argument, the message selector as
its second argument (which must be a symbol) and the message arguments as
its remaining arguments.
The 'send' function determines the class of the receiving object and
attempts to find a method corresponding to the message selector in the set
of messages defined for that class. If the message is not found in the
object's class and the class has a super-class, the search continues by
looking at the messages defined for the super-class. This process continues
from one super-class to the next until a method for the message is found.
If no method is found, an error occurs.
To perform a method lookup starting with the method's superclass rather
than the object's class, use the function 'send-super'. This allows a
subclass to invoke a standard method in its parent class even though it
overrides that method with its own specialized version.
When a method is found, the evaluator binds the receiving object to the
symbol 'self' and evaluates the method using the remaining elements of the
original list as arguments to the method. These arguments are always
evaluated prior to being bound to their corresponding formal arguments. The
result of evaluating the method becomes the result of the expression.
Two objects, both classes, are predefined: Object and Class. Both Object
and Class are of class Class. The superclass of Class is Object, while
Object has no superclass. Typical use is to create new classes (by sending
:new to Class) to represent application objects. Objects of these classes,
created by sending :new to the appropriate new class, are subclasses of
Object. The Object method :show can be used to view the contents of any
object.
XLISP 2.1e OBJECTS Page 19
THE 'Object' CLASS
Object THE TOP OF THE CLASS HEIRARCHY
Messages:
:show SHOW AN OBJECT'S INSTANCE VARIABLES
returns the object
:class RETURN THE CLASS OF AN OBJECT
returns the class of the object
:prin1 [<stream>] PRINT THE OBJECT
<stream> default, or NIL, is *standard-output*, T is
*terminal-io*
returns the object
:isnew THE DEFAULT OBJECT INITIALIZATION ROUTINE
returns the object
:superclass GET THE SUPERCLASS OF THE OBJECT
returns NIL
(Defined in classes.lsp, see :superclass below)
:ismemberof <class> CLASS MEMBERSHIP
<class> class name
returns T if object member of class, else NIL
(defined in classes.lsp)
:iskindof <class> CLASS MEMBERSHIP
<class> class name
returns T if object member of class or subclass of class,
else NIL
(defined in classes.lsp)
:respondsto <sel> SELECTOR KNOWLEDGE
<sel> message selector
returns T if object responds to message selector, else
NIL.
(defined in classes.lsp)
:storeon READ REPRESENTATION
returns a list, that when executed will create a copy of
the object. Only works for members of classes
created with defclass.
(defined in classes.lsp)
XLISP 2.1e OBJECTS Page 20
THE 'Class' CLASS
Class THE CLASS OF ALL OBJECT CLASSES (including itself)
Messages:
:new CREATE A NEW INSTANCE OF A CLASS
returns the new class object
:isnew <ivars> [<cvars> [<super>]] INITIALIZE A NEW CLASS
<ivars> the list of instance variable symbol
<cvars> the list of class variable symbols
<super> the superclass (default is Object)
returns the new class object
:answer <msg> <fargs> <code> ADD A MESSAGE TO A CLASS
<msg> the message symbol
<fargs> the formal argument list (lambda list)
<code> a list of executable expressions
returns the object
:superclass GET THE SUPERCLASS OF THE OBJECT
returns the superclass (of the class)
(defined in classes.lsp)
:messages GET THE LIST OF MESSAGES OF THE CLASS
returns association list of message selectors and closures
for messages.
(defined in classes.lsp)
:storeon READ REPRESENTATION
returns a list, that when executed will re-create the
class and its methods.
(defined in classes.lsp)
When a new instance of a class is created by sending the message ':new' to
an existing class, the message ':isnew' followed by whatever parameters
were passed to the ':new' message is sent to the newly created object.
Therefore, when a new class is created by sending ':new' to class 'Class'
the message ':isnew' is sent to Class automatically. To create a new class,
a function of the following format is used:
(setq <newclassname> (send Class :new <ivars> [<cvars> [<super>]]))
When a new class is created, an optional parameter may be specified
indicating the superclass of the new class. If this parameter is omitted,
the new class will be a subclass of 'Object'. A class inherits all instance
variables, and methods from its super-class. Only class variables of a
method's class are accessable.
XLISP 2.1e OBJECTS Page 21
INSTANCE VARIABLES OF CLASS 'CLASS':
MESSAGES - An association list of message names and closures
implementing the messages.
IVARS - List of names of instance variables.
CVARS - List of names of class variables.
CVAL - Array of class variable values.
SUPERCLASS - The superclass of this class or NIL if no superclass
(only for class OBJECT).
IVARCNT - instance variables in this class (length of IVARS)
IVARTOTAL - total instance variables for this class and all
superclasses of this class.
PNAME - printname string for this class.
XLISP 2.1e SYMBOLS Page 22
SYMBOLS
All values are initially NIL unless otherwise specified. All are special
variables unless indicated to be constants.
˘ NIL - represents empty list and the boolean value for "false". The
value of NIL is NIL, and cannot be changed (it is a constant). (car
NIL) and (cdr NIL) are also defined to be NIL.
˘ t - boolean value "true" is constant with value t.
˘ self - within a method context, the current object (see page 18),
otherwise initially unbound.
˘ object - constant, value is the class 'Object.'
˘ class - constant, value is the class 'Class'.
˘ internal-time-units-per-second - integer constant to divide returned
times by to get time in seconds.
˘ pi - floating point aproximation of pi (constant defined when math
extension is compiled).
˘ *obarray* - the object hash table. Length of array is a compilation
option. Objects are hashed using the hash function and are placed on a
list in the appropriate array slot.
˘ *terminal-io* - stream bound to keyboard and display. Do not alter.
˘ *standard-input* - the standard input stream, initially stdin. If
stdin is not redirected on the command line, then *terminal-io* is
used so that all interactive i/o uses the same stream.
˘ *standard-output* - the standard output stream, initially stdout. If
stdout is not redirected on the command line then *terminal-io* is
used so that all interactive i/o uses the same stream.
˘ *error-output* - the error output stream (used by all error messages),
initially same as *terminal-io*.
˘ *trace-output* - the trace output stream (used by the trace function),
initially same as *terminal-io*.
˘ *debug-io* - the break loop i/o stream, initially same as
*terminal-io*. System messages (other than error messages) also print
out on this stream.
˘ *breakenable* - flag controlling entering break loop on errors (see
page 4)
˘ *tracelist* - list of names of functions to trace, as set by trace
function.
˘ *tracenable* - enable trace back printout on errors (see page 4).
˘ *tracelimit* - number of levels of trace back information (see page
4).
˘ *evalhook* - user substitute for the evaluator function (see page 8,
and evalhook and applyhook functions).
˘ *applyhook* - user substitute for function application (see page 8,
and evalhook and applyhook functions).
˘ *readtable* - the current readtable (see page 12).
˘ *unbound* - indicator for unbound symbols. A constant. Do not use this
symbol since accessing any variable to which this has been bound will
cause an unbound symbol error message.
XLISP 2.1e SYMBOLS Page 23
˘ *gc-flag* - controls the printing of gc messages. When non-NIL, a
message is printed after each garbage collection giving the total
number of nodes and the number of nodes free.
˘ *gc-hook* - function to call after garbage collection (see page 8).
˘ *integer-format* - format for printing integers (when not bound to a
string, defaults to "%d" or "%ld" depending on implementation)
˘ *ratio-format* - format for printing ratios (when not bound to a
string, defaults to "%d/%d" or "%ld/%ld" depending on implementation)
˘ *float-format* - format for printing floats (when not bound to a
string, defaults to "%g")
˘ *readtable-case* - symbol read and output case. See page 14 for
details
˘ *print-case* - symbol output case when printing. See page 14 for
details
˘ *print-level* - When bound to a number, list levels beyond this value
are printed as '#'. Used by all printing functions. Good precaution to
avoid getting caught in circular lists.
˘ *print-length* - When bound to a number, lists longer than this value
are printed as '...'. Used by all printing functions. Good precaution
to avoid getting caught in circular lists.
˘ *dos-input* - When not NIL, uses dos line input function for read (see
page 2).
˘ *displace-macros* - When not NIL, macros are replaced by their
expansions when exectuted (see page 7).
˘ *random-state* - the default random-state used by the random function.
˘ *features* - list of features, initially (:xlisp), used for #+ and #-
reader macros.
There are several symbols maintained by the read/eval/print loop. The
symbols '+', '++', and '+++' are bound to the most recent three input
expressions. The symbols '*', '**' and '***' are bound to the most recent
three results. The symbol '-' is bound to the expression currently being
evaluated. It becomes the value of '+' at the end of the evaluation.
XLISP 2.1e EVALUATION FUNCTIONS Page 24
EVALUATION FUNCTIONS
(eval <expr>) EVALUATE AN XLISP EXPRESSION
<expr> the expression to be evaluated
returns the result of evaluating the expression
(apply <fun> <arg>...<args>) APPLY A FUNCTION TO A LIST OF ARGUMENTS
<fun> the function to apply (or function symbol). May not be macro
or fsubr.
<arg> initial arguments, which are CONSed to...
<args> the argument list
returns the result of applying the function to the arguments
(funcall <fun> <arg>...) CALL A FUNCTION WITH ARGUMENTS
<fun> the function to call (or function symbol). May not be macro
or fsubr.
<arg> arguments to pass to the function
returns the result of calling the function with the arguments
(quote <expr>) RETURN AN EXPRESSION UNEVALUATED
fsubr
<expr> the expression to be quoted (quoted)
returns <expr> unevaluated
(function <expr>) GET THE FUNCTIONAL INTERPRETATION
fsubr
<expr> the symbol or lambda expression (quoted)
returns the functional interpretation
(identity <expr>) RETURN THE EXPRESSION
New function. In common.lsp
<expr> the expression
returns the expression
(backquote <expr>) FILL IN A TEMPLATE
fsubr. Note: an improved backquote facility, which works properly when
nested, is available by loading the file backquot.lsp.
<expr> the template (quoted)
returns a copy of the template with comma and comma-at expressions
expanded.
(comma <expr>) COMMA EXPRESSION
(Never executed) As the object of a backquote expansion, the
expression is evaluated and becomes an object in the enclosing list.
(comma-at <expr>) COMMA-AT EXPRESSION
(Never executed) As the object of a backquote expansion, the
expression is evaluated (and must evaluate to a list) and is then
spliced into the enclosing list.
XLISP 2.1e EVALUATION FUNCTIONS Page 25
(lambda <args> <expr>...) MAKE A FUNCTION CLOSURE
fsubr
<args> formal argument list (lambda list) (quoted)
<expr> expressions of the function body (quoted)
returns the function closure
(get-lambda-expression <closure>) GET THE LAMBDA EXPRESSION
<closure> the closure
returns the original lambda expression
(macroexpand <form>) RECURSIVELY EXPAND MACRO CALLS
<form> the form to expand
returns the macro expansion
(macroexpand-1 <form>) EXPAND A MACRO CALL
<form> the macro call form
returns the macro expansion
XLISP 2.1e SYMBOL FUNCTIONS Page 26
SYMBOL FUNCTIONS
(set <sym> <expr>) SET THE GLOBAL VALUE OF A SYMBOL
<sym> the symbol being set
<expr> the new value
returns the new value
(setq [<sym> <expr>]...) SET THE VALUE OF A SYMBOL
fsubr
<sym> the symbol being set (quoted)
<expr> the new value
returns the new value
(psetq [<sym> <expr>]...) PARALLEL VERSION OF SETQ
fsubr. All expressions are evaluated before any assignments are
made.
<sym> the symbol being set (quoted)
<expr> the new value
returns the new value
(setf [<place> <expr>]...) SET THE VALUE OF A FIELD
fsubr
<place> the field specifier (if a macro it is expanded, then the form
arguments are evaluated):
<sym> set value of a symbol
(car <expr>) set car of a cons node
(cdr <expr>) set cdr of a cons node
(nth <n> <expr>) set nth car of a list
(aref <expr> <n>) set nth element of an array or string
(elt <expr> <n>) set nth element of a sequence
(get <sym> <prop>) set value of a property
(symbol-value <sym>) set global value of a symbol
(symbol-function <sym>) set functional value of a
symbol
(symbol-plist <sym>) set property list of a symbol
(gethash <key> <tbl> <def>) add or replace hash table
entry. <def> is ignored
(send <obj> :<ivar>) (When classes.lsp used), set instance
variable of object.
(<sym>-<element> <struct>) set the element of structure
struct, type sym.
(<fieldsym> <args>) the function stored in property *setf*
in symbol <fieldsym> is applied to
(<args> <expr>). As an alternative, the
function stored in property
*setf-lambda* is applied, then the
result is evaled in the current context.
<value> the new value
returns the new value
XLISP 2.1e SYMBOL FUNCTIONS Page 27
(defsetf <sym> <fcn>) DEFINE A SETF FIELD SPECIFIER
(defsetf <sym> <fargs> (<value>) <expr>...)
Defined as macro in common.lsp. Convenient, Common Lisp compatible
alternative to setting *setf* or *setf-lambda* property directly.
<sym> field specifier symbol (quoted)
<fcn> function to use (quoted symbol) which takes the same
arguments as the field specifier plus an additional argument
for the value. The value must be returned.
<fargs> formal argument list of unevaluated arguments (lambda list)
(quoted)
<value> symbol bound to value to store (quoted).
<expr> The last expression must an expression to evaluate in the
setf context.In this respect, defsetf works like a macro
definition.
returns the field specifier symbol
(push <expr> <place>) CONS TO A FIELD
Defined as macro in common.lsp. Only evaluates place form arguments
one time. It is recommended that *displace-macros* be non-NIL for best
performance.
<place> field specifier being modified (see setf)
<expr> value to cons to field
returns the new value which is (CONS <expr> <place>)
(pushnew <expr> <place> &key :test :test-not :key) CONS NEW TO A FIELD
Defined as macro in common.lsp. Only evaluates place form arguments
one time. It is recommended that *displace-macros* be non-NIL for best
performance.
<place> field specifier being modified (see setf)
<expr> value to cons to field, if not already MEMBER of field
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function list argument (defaults
to identity)
returns the new value which is (CONS <expr> <place>) or <place>
(pop <place>) REMOVE FIRST ELEMENT OF A FIELD
Defined as macro in common.lsp. Only evaluates place form arguments
one time. It is recommended that *displace-macros* be non-NIL for best
performance.
<place> the field being modified (see setf)
returns (CAR <place>), field changed to (CDR <place>)
XLISP 2.1e SYMBOL FUNCTIONS Page 28
(incf <place> [<value>]) INCREMENT A FIELD
(decf <place> [<value>]) DECREMENT A FIELD
Defined as macro in common.lsp. Only evaluates place form arguments
one time. It is recommended that *displace-macros* be non-NIL for best
performance.
<place> field specifier being modified (see setf)
<value> Numeric value (default 1)
returns the new value which is (+ <place> <value>) or (- <place>
<value>)
(defun <sym> <fargs> <expr>...) DEFINE A FUNCTION
(defmacro <sym> <fargs> <expr>...) DEFINE A MACRO
fsubr
<sym> symbol being defined (quoted)
<fargs> formal argument list (lambda list) (quoted)
<expr> expressions constituting the body of the function (quoted)
returns the function symbol
(gensym [<tag>]) GENERATE A SYMBOL
<tag> string or number
returns the new symbol, uninterned
(intern <pname>) MAKE AN INTERNED SYMBOL
<pname> the symbol's print name string
returns the new symbol
(make-symbol <pname>) MAKE AN UNINTERNED SYMBOL
<pname> the symbol's print name string
returns the new symbol
(symbol-name <sym>) GET THE PRINT NAME OF A SYMBOL
<sym> the symbol
returns the symbol's print name
(symbol-value <sym>) GET THE VALUE OF A SYMBOL
<sym> the symbol
returns the symbol's value
(symbol-function <sym>) GET THE FUNCTIONAL VALUE OF A SYMBOL
<sym> the symbol
returns the symbol's functional value
(symbol-plist <sym>) GET THE PROPERTY LIST OF A SYMBOL
<sym> the symbol
returns the symbol's property list
(hash <expr> <n>) COMPUTE THE HASH INDEX
<expr> the object to hash
<n> the table size (positive integer)
returns the hash index (integer 0 to n-1)
XLISP 2.1e SYMBOL FUNCTIONS Page 29
(makunbound <sym>) MAKE A SYMBOL VALUE BE UNBOUND
You cannot unbind constants.
<sym> the symbol
returns the symbol
(fmakunbound <sym>) MAKE A SYMBOL FUNCTION BE UNBOUND
Defined in init.lsp
<sym> the symbol
returns the symbol
(unintern <sym>) UNINTERN A SYMBOL
Defined in common.lsp
<sym> the symbol
returns t if successful, NIL if symbol not interned
(defconstant <sym> <val>) DEFINE A CONSTANT
fsubr.
<sym> the symbol
<val> the value
returns the value
(defparameter <sym> <val>) DEFINE A PARAMETER
fsubr.
<sym> the symbol
<val> the value
returns the value
(defvar <sym> [<val>]) DEFINE A VARIABLE
fsubr. Variable only initialized if not previously defined.
<sym> the symbol
<val> the initial value, or NIL if absent.
returns the current value
XLISP 2.1e PROPERTY LIST FUNCTIONS Page 30
PROPERTY LIST FUNCTIONS
Note that property names are not limited to symbols.
(get <sym> <prop>) GET THE VALUE OF A PROPERTY
<sym> the symbol
<prop> the property symbol
returns the property value or NIL
(putprop <sym> <val> <prop>) PUT A PROPERTY ONTO A PROPERTY LIST
<sym> the symbol
<val> the property value
<prop> the property symbol
returns the property value
(remprop <sym> <prop>) DELETE A PROPERTY
<sym> the symbol
<prop> the property symbol
returns NIL
XLISP 2.1e HASH TABLE FUNCTIONS Page 31
HASH TABLE FUNCTIONS
A hash table is implemented as an structure of type hash-table. No general
accessing functions are provided, and hash tables print out using the angle
bracket convention (not readable by READ). The first element is the
comparison function. The remaining elements contain association lists of
keys (that hash to the same value) and their data.
(make-hash-table &key :size :test) MAKE A HASH TABLE
:size size of hash table -- should be a prime number. Default is
31.
:test comparison function. Defaults to eql.
returns the hash table
(gethash <key> <table> [<def>]) EXTRACT FROM HASH TABLE
See also gethash in SETF.
<key> hash key
<table> hash table
<def> value to return on no match (default is NIL)
returns associated data, if found, or <def> if not found.
(remhash <key> <table>) DELETE FROM HASH TABLE
<key> hash key
<table> hash table
returns T if deleted, NIL if not in table
(clrhash <table>) CLEAR THE HASH TABLE
<table> hash table
returns NIL, all entries cleared from table
(hash-table-count <table>) NUMBER OF ENTRIES IN HASH TABLE
<table> hash table
returns integer number of entries in table
(maphash <fcn> <table>) MAP FUNCTION OVER TABLE ENTRIES
<fcn> the function or function name, a function of two arguments,
the first is bound to the key, and the second the value of
each table entry in turn.
<table> hash table
returns NIL
XLISP 2.1e ARRAY FUNCTIONS Page 32
ARRAY FUNCTIONS
Note that sequence functions also work on arrays.
(aref <array> <n>) GET THE NTH ELEMENT OF AN ARRAY
See setf for setting elements of arrays
<array> the array (or string)
<n> the array index (integer, zero based)
returns the value of the array element
(make-array <size>) MAKE A NEW ARRAY
<size> the size of the new array (integer)
returns the new array
(vector <expr>...) MAKE AN INITIALIZED VECTOR
<expr> the vector elements
returns the new vector
XLISP 2.1e SEQUENCE FUNCTIONS Page 33
SEQUENCE FUNCTIONS
These functions work on sequences -- lists, arrays, or strings.
(concatenate <type> <expr> ...) CONCATENATE SEQUENCES
If result type is string, sequences must contain only characters.
<type> result type, one of CONS, LIST, ARRAY, or STRING
<expr> zero or more sequences to concatenate
returns a sequence which is the concatenation of the arguement
sequences
(elt <expr> <n>) GET THE NTH ELEMENT OF A SEQUENCE
<expr> the sequence
<n> the index of element to return
returns the element if the index is in bounds, otherwise error
(map <type> <fcn> <expr> ...) APPLY FUNCTION TO SUCCESSIVE ELEMENTS
<type> result type, one of CONS, LIST, ARRAY, STRING, or NIL
<fcn> the function or function name
<expr> a sequence for each argument of the function
returns a new sequence of type <type>.
(every <fcn> <expr> ...) APPLY FUNCTION TO ELEMENTS UNTIL FALSE
(notevery <fcn> <expr> ...)
<fcn> the function or function name
<expr> a sequence for each argument of the function
returns every returns last evaluated function result
notevery returns T if there is a NIL function result, else
NIL
(some <fcn> <expr> ...) APPLY FUNCTION TO ELEMENTS UNTIL TRUE
(notany <fcn> <expr> ...)
<fcn> the function or function name
<expr> a sequence for each argument of the function
returns some returns first non-NIL function result, or NIL
notany returns NIL if there is a non-NIL function result,
else T
(length <expr>) FIND THE LENGTH OF A SEQUENCE
<expr> the list, vector or string
returns the length of the list, vector or string
(reverse <expr>) REVERSE A SEQUENCE
(nreverse <expr>) DESTRUCTIVELY REVERSE A SEQUENCE
<expr> the sequence to reverse
returns a new sequence in the reverse order
XLISP 2.1e SEQUENCE FUNCTIONS Page 34
(subseq <seq> <start> [<end>]) EXTRACT A SUBSEQUENCE
<seq> the sequence
<start> the starting position (zero origin)
<end> the ending position + 1 (defaults to end) or NIL for end of
sequence
returns the sequence between <start> and <end>
(search <seq1> <seq2> &key :test :test-not :key :start1 :end1 :start2
:end2)
SEARCH FOR SEQUENCE
<seq1> the sequence to search for
<seq2> the sequence to search in
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function arguments (defaults to
identity)
:start1 starting index in <seq1>
:end1 index of end+1 in <seq1> or NIL for end of sequence
:start2 starting index in <seq2>
:end2 index of end+1 in <seq2> or NIL for end of sequence
returns position of first match
(remove <expr> <seq> &key :test :test-not :key :start :end)
REMOVE ELEMENTS FROM A SEQUENCE
<expr> the element to remove
<seq> the sequence
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function sequence argument
(defaults to identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns copy of sequence with matching expressions removed
(remove-if <test> <seq> &key :key :start :end)
REMOVE ELEMENTS THAT PASS TEST
(remove-if-not <test> <seq> &key :key :start :end)
REMOVE ELEMENTS THAT FAIL TEST
<test> the test predicate
<seq> the sequence
:key function to apply to test function argument (defaults to
identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns copy of sequence with matching or non-matching elements
removed
XLISP 2.1e SEQUENCE FUNCTIONS Page 35
(count-if <test> <seq> &key :key :start :end)
COUNT ELEMENTS THAT PASS TEST
<test> the test predicate
<seq> the sequence
:key function to apply to test function argument (defaults to
identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns count of matching elements
(find-if <test> <seq> &key :key :start :end)
FIND FIRST ELEMENT THAT PASSES TEST
<test> the test predicate
<seq> the list
:key function to apply to test function argument (defaults to
identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns first element of sequence that passes test
(position-if <test> <seq> &key :key :start :end)
FIND POSITION OF FIRST ELEMENT THAT PASSES TEST
<test> the test predicate
<seq> the list
:key function to apply to test function argument (defaults to
identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns position of first element of sequence that passes test, or
NIL.
(delete <expr> <seq> &key :key :test :test-not :start :end)
DELETE ELEMENTS FROM A SEQUENCE
<expr> the element to delete
<seq> the sequence
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function sequence argument
(defaults to identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns the sequence with the matching expressions deleted
XLISP 2.1e SEQUENCE FUNCTIONS Page 36
(delete-if <test> <seq> &key :key :start :end)
DELETE ELEMENTS THAT PASS TEST
(delete-if-not <test> <seq> &key :key :start :end)
DELETE ELEMENTS THAT FAIL TEST
<test> the test predicate
<seq> the sequence
:key function to apply to test function argument (defaults to
identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns the sequence with matching or non-matching elements deleted
(reduce <fcn> <seq> &key :initial-value :start :end)
REDUCE SEQUENCE TO SINGLE VALUE
<fcn> function (of two arguments) to apply to result of previous
function application (or first element) and each member of
sequence.
<seq> the sequence
:initial-value value to use as first argument in first function
application rather than using the first element of
the sequence.
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns if sequence is empty and there is no initial value, returns
result of applying function to zero arguements. If there is
a single element, returns the element. Otherwise returns the
result of the last function application.
(remove-duplicates <seq> &key :test :test-not :key :start :end)
REMOVE DUPLICATES FROM SEQUENCE
<seq> the sequence
:test comparison function (default eql)
:test-not comparison function (sense inverted)
:key function to apply to test function arguments (defaults to
identity)
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns copy of sequence with duplicates removed.
(fill <seq> <expr> &key :start :end) REPLACE ITEMS IN SEQUENCE
Defined in common.lsp
<seq> the sequence
<expr> new value to place in sequence
:start starting index
:end index of end+1, or NIL for (length <seq>)
returns sequence with items replaced with new item
XLISP 2.1e SEQUENCE FUNCTIONS Page 37
(replace <seq1> <seq2> &key :start1 :end1 :start2 :end2)
REPLACE ITEMS IN SEQUENCE FROM SEQUENCE
Defined in common.lsp
<seq1> the sequence to modify
<seq2> sequence with new items
:start1 starting index in <seq1>
:end1 index of end+1 in <seq1> or NIL for end of sequence
:start2 starting index in <seq2>
:end2 index of end+1 in <seq2> or NIL for end of sequence
returns first sequence with items replaced
XLISP 2.1e LIST FUNCTIONS Page 38
LIST FUNCTIONS
(car <expr>) RETURN THE CAR OF A LIST NODE
<expr> the list node
returns the car of the list node
(cdr <expr>) RETURN THE CDR OF A LIST NODE
<expr> the list node
returns the cdr of the list node
(cxxr <expr>) ALL CxxR COMBINATIONS
(cxxxr <expr>) ALL CxxxR COMBINATIONS
(cxxxxr <expr>) ALL CxxxxR COMBINATIONS
(first <expr>) A SYNONYM FOR CAR
(second <expr>) A SYNONYM FOR CADR
(third <expr>) A SYNONYM FOR CADDR
(fourth <expr>) A SYNONYM FOR CADDDR
(rest <expr>) A SYNONYM FOR CDR
(cons <expr1> <expr2>) CONSTRUCT A NEW LIST NODE
<expr1> the car of the new list node
<expr2> the cdr of the new list node
returns the new list node
(acons <expr1> <expr2> <alist>) ADD TO FRONT OF ASSOC LIST
defined in common.lsp
<expr1> key of new association
<expr2> value of new association
<alist> association list
returns new association list, which is (cons (cons <expr1> <expr2>)
<expr3>))
(list <expr>...) CREATE A LIST OF VALUES
(list* <expr> ... <list>)
<expr> expressions to be combined into a list
returns the new list
(append <expr>...) APPEND LISTS
<expr> lists whose elements are to be appended
returns the new list
(last <list>) RETURN THE LAST LIST NODE OF A LIST
<list> the list
returns the last list node in the list
(butlast <list> [<n>]) RETURN COPY OF ALL BUT LAST OF LIST
<list> the list
<n> count of elements to omit (default 1)
returns copy of list with last element(s) absent.
XLISP 2.1e LIST FUNCTIONS Page 39
(nth <n> <list>) RETURN THE NTH ELEMENT OF A LIST
<n> the number of the element to return (zero origin)
<list> the list
returns the nth element or NIL if the list isn't that long
(nthcdr <n> <list>) RETURN THE NTH CDR OF A LIST
<n> the number of the element to return (zero origin)
<list> the list
returns the nth cdr or NIL if the list isn't that long
(member <expr> <list> &key :test :test-not :key)
FIND AN EXPRESSION IN A LIST
<expr> the expression to find
<list> the list to search
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function list argument (defaults
to identity)
returns the remainder of the list starting with the expression
(assoc <expr> <alist> &key :test :test-not :key)
FIND AN EXPRESSION IN AN A-LIST
<expr> the expression to find
<alist> the association list
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function list argument (defaults
to identity)
returns the alist entry or NIL
(mapc <fcn> <list1> <list>...) APPLY FUNCTION TO SUCCESSIVE CARS
<fcn> the function or function name
<listn> a list for each argument of the function
returns the first list of arguments
(mapcar <fcn> <list1> <list>...) APPLY FUNCTION TO SUCCESSIVE CARS
<fcn> the function or function name
<listn> a list for each argument of the function
returns a list of the values returned
(mapl <fcn> <list1> <list>...) APPLY FUNCTION TO SUCCESSIVE CDRS
<fcn> the function or function name
<listn> a list for each argument of the function
returns the first list of arguments
(maplist <fcn> <list1> <list>...) APPLY FUNCTION TO SUCCESSIVE CDRS
<fcn> the function or function name
<listn> a list for each argument of the function
returns a list of the values returned
XLISP 2.1e LIST FUNCTIONS Page 40
(mapcan <fcn> <list1> <list>...) APPL FUNCTION TO SUCCESSIVE CARS
<fcn> the function or function name
<listn> a list for each argument of the function
returns list of return values nconc'd together
(mapcon <fcn> <list1> <list>...) APPL FUNCTION TO SUCCESSIVE CDRS
<fcn> the function or function name
<listn> a list for each argument of the function
returns list of return values nconc'd together
(subst <to> <from> <expr> &key :test :test-not :key)
SUBSTITUTE EXPRESSIONS
Does minimum copying as required by Common Lisp
<to> the new expression
<from> the old expression
<expr> the expression in which to do the substitutions
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function expression argument
(defaults to identity)
returns the expression with substitutions
(sublis <alist> <expr> &key :test :test-not :key)
SUBSTITUTE WITH AN A-LIST
Does minimum copying as required by Common Lisp
<alist> the association list
<expr> the expression in which to do the substitutions
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function expression argument
(defaults to identity)
returns the expression with substitutions
(pairlis <keys> <values> [<alist>]) BUILD AN A-LIST FROM TWO LISTS
In file common.lsp
<keys> list of association keys
<values> list of association values, same length as keys
<alist> existing association list, default NIL
returns new association list
(copy-list <list>) COPY THE TOP LEVEL OF A LIST
In file common.lsp
<list> the list
returns a copy of the list (new cons cells in top level)
(copy-alist <alist>) COPY AN ASSOCIATION LIST
In file common.lsp
<alist> the association list
returns a copy of the association list (keys and values not copies)
XLISP 2.1e LIST FUNCTIONS Page 41
(copy-tree <tree>) COPY A TREE
In file common.lsp
<tree> a tree structure of cons cells
returns a copy of the tree structure
(intersection <list1> <list2> &key :test :test-not :key) SET FUNCTIONS
(union <list1> <list2> &key :test :test-not :key)
(set-difference <list1> <list2> &key :test :test-not :key)
(set-exclusive-or <list1> <list2> &key :test :test-not :key)
(nintersection <list1> <list2> &key :test :test-not :key)
(nunion <list1> <list2> &key :test :test-not :key)
(nset-difference <list1> <list2> &key :test :test-not :key)
(nset-exclusive-or <list1> <list2> &key :test :test-not :key)
set-exclusive-or and nset-exclusive-or defined in common.lsp. nunion,
nintersection, and nset-difference are aliased to their
non-destructive counterparts in common.lsp.
<list1> first list
<list2> second list
:test the test function (defaults to eql)
:test-not the test function (sense inverted)
:key function to apply to test function arguments (defaults to
identity)
returns intersection: list of all elements in both lists
union: list of all elements in either list
set-diference: list of all elements in first list but not in
second list
set-exclusive-or: list of all elements in only one list
"n" versions are potentially destructive.
(adjoin <expr> <list> :test :test-not :key) ADD UNIQUE TO LIST
<expr> new element to add
<list> the list
:test the test function (defaults to eql)
:test-not the test function <sense inverted)
:key function to apply to test function arguments (defaults to
identity)
returns if element not in list then (cons <expr> <list>), else
<list>.
XLISP 2.1e DESTRUCTIVE LIST FUNCTIONS Page 42
DESTRUCTIVE LIST FUNCTIONS
See also nreverse, delete, delete-if, delete-if-not, fill, and replace
under SEQUENCE FUNCTIONS, setf under SYMBOL FUNCTIONS, and nintersection,
nunion, nset-difference, and nset-exclusive-or under LIST FUNCTIONS.
(rplaca <list> <expr>) REPLACE THE CAR OF A LIST NODE
<list> the list node
<expr> the new value for the car of the list node
returns the list node after updating the car
(rplacd <list> <expr>) REPLACE THE CDR OF A LIST NODE
<list> the list node
<expr> the new value for the cdr of the list node
returns the list node after updating the cdr
(nconc <list>...) DESTRUCTIVELY CONCATENATE LISTS
<list> lists to concatenate
returns the result of concatenating the lists
(sort <list> <test> &key :key) SORT A LIST
<list> the list to sort
<test> the comparison function
:key function to apply to comparison function arguments (defaults
to identity)
returns the sorted list
XLISP 2.1e ARITHMETIC FUNCTIONS Page 43
ARITHMETIC FUNCTIONS
Warning: integer and ratio calculations that overflow become floating point
values as part of the math extension, but give no error otherwise. On
systems with IEEE floating point, the values +INF and -INF result from
overflowing floating point calculations.
The math extension option adds complex numbers, ratios, new functions, and
additional functionality to some existing functions. Because of the size of
the extension, and the performance loss it entails, some users may not wish
to include it. This section documents the math functions both with and
without the extension.
Functions that are described as having floating point arguments (SIN COS
TAN ASIN ACOS ATAN EXPT EXP SQRT) will take arguments of any type (real or
complex) when the math extension is used. In the descriptions, "rational
number" means integer or ratio only, and "real number" means floating
point number or rational only.
Any rational results are reduced to canonical form (the gcd of the
numerator and denominator is 1, the denominator is positive); integral
results are reduced to integers. Integer complex numbers with zero
imaginary parts are reduced to integers.
(truncate <expr> <denom>) TRUNCATES TOWARD ZERO
(round <expr> <denom>) ROUNDS TOWARD NEAREST INTEGER
(floor <expr> <denom>) TRUNCATES TOWARD NEGATIVE INFINITY
(ceiling <expr> <denom>) TRUNCATES TOWARD INFINITY
Round, floor, and ceiling, and the second argument of truncate, are
part of the math extension. Results too big to be represented as
integers are returned as floating point numbers as part of the math
extension. Integers are returned as is.
<expr> the real number
<denom> real number to divide <expr> by before converting
returns the integer result of converting the number
(float <expr>) CONVERTS AN INTEGER TO A FLOATING POINT NUMBER
<expr> the real number
returns the number as a floating point number
(rational <expr>) CONVERTS A REAL NUMBER TO A RATIONAL
Floating point numbers too large to express return the floating point
number, while numbers too small to express return zero. Rational
numbers are returned as is.
<expr> the real number
returns the number as a ratio or integer.
XLISP 2.1e ARITHMETIC FUNCTIONS Page 44
(+ [<expr>...]) ADD A LIST OF NUMBERS
With no arguments returns addition identity, 0 (integer)
<expr> the numbers
returns the result of the addition
(- <expr>...) SUBTRACT A LIST OF NUMBERS OR NEGATE A SINGLE NUMBER
<expr> the numbers
returns the result of the subtraction
(* [<expr>...]) MULTIPLY A LIST OF NUMBERS
With no arguments returns multiplication identity, 1
<expr> the numbers
returns the result of the multiplication
(/ <expr>...) DIVIDE A LIST OF NUMBERS OR INVERT A SINGLE NUMBER
With the math extension, division of integer numbers results in a
rational quotient, rather than integer. To perform integer division,
use TRUNCATE. When an integer complex is divided by an integer, the
quotient is floating point complex.
<expr> the numbers
returns the result of the division
(1+ <expr>) ADD ONE TO A NUMBER
<expr> the number
returns the number plus one
(1- <expr>) SUBTRACT ONE FROM A NUMBER
<expr> the number
returns the number minus one
(rem <expr>...) REMAINDER OF A LIST OF NUMBERS
With the math extension, only two arguments allowed.
<expr> the real numbers (must be integers, without math extension)
returns the result of the remainder operation (remainder with
truncating division)
(mod <expr1> <expr2>) NUMBER MODULO ANOTHER NUMBER
Part of math extension.
<expr1> real number
<expr2> real number divisor (may not be zero)
returns the remainder after dividing <expr1> by <expr2> using
flooring division, thus there is no discontinuity in the
function around zero.
(min <expr>...) THE SMALLEST OF A LIST OF NUMBERS
<expr> the real numbers
returns the smallest number in the list
(max <expr>...) THE LARGEST OF A LIST OF NUMBERS
<expr> the real numbers
returns the largest number in the list
XLISP 2.1e ARITHMETIC FUNCTIONS Page 45
(abs <expr>) THE ABSOLUTE VALUE OF A NUMBER
<expr> the number
returns the absolute value of the number, which is the floating
point magnitude for complex numbers.
(signum <expr>) GET THE SIGN OF A NUMBER
Defined in common.lsp
<expr> the number
returns zero if number is zero, one if positive, or negative one if
negative. Numeric type is same as number. For a complex
number, returns unit magnitude but same phase as number.
(gcd [<n>...]) COMPUTE THE GREATEST COMMON DIVISOR
With no arguments returns 0, with one argument returns the argument.
<n> The number(s) (integer)
returns the greatest common divisor
(lcm <n>...) COMPUTE THE LEAST COMMON MULTIPLE
Part of math extension. A result which would be larger than the
largest integer causes an error.
<n> The number(s) (integer)
returns the least common multiple
(random <n> [<state>]) COMPUTE A PSEUDO-RANDOM NUMBER
<n> the real number upper bound
<state> a random-state (default is *random-state*)
returns a random number in range [0,n)
(make-random-state [<state>]) CREATE A RANDOM-STATE
<state> a random-state, t, or NIL (default NIL). NIL means
*random-state*
returns If <state> is t, a random random-state, otherwise a copy of
<state>
(sin <expr>) COMPUTE THE SINE OF A NUMBER
(cos <expr>) COMPUTE THE COSINE OF A NUMBER
(tan <expr>) COMPUTE THE TANGENT OF A NUMBER
(asin <expr>) COMPUTE THE ARC SINE OF A NUMBER
(acos <expr>) COMPUTE THE ARC COSINE OF A NUMBER
<expr> the floating point number
returns the sine, cosine, tangent, arc sine, or arc cosine of the
number
(atan <expr> [<expr2>]) COMPUTE THE ARC TANGENT OF A NUMBER
<expr> the floating point number (numerator)
<expr2> the denominator, default 1. May only be specified if math
extension installed
returns the arc tangent of <expr>/<expr2>
XLISP 2.1e ARITHMETIC FUNCTIONS Page 46
(sinh <expr>) COMPUTE THE HYPERBOLIC SINE OF A NUMBER
(cosh <expr>) COMPUTE THE HYPERBOLIC COSINE OF A NUMBER
(tanh <expr>) COMPUTE THE HYPERBOLIC TANGENT OF A NUMBER
(asinh <expr>) COMPUTE THE HYPERBOLIC ARC SINE OF A NUMBER
(acosh <expr>) COMPUTE THE HYPERBOLIC ARC COSINE OF A NUMBER
(atanh <expr>) COMPUTE THE HYPERBOLIC ARC TANGENT OF A NUMBER
Defined in common.lsp
<expr> the number
returns the hyperbolic sine, cosine, tangent, arc sine, arc cosine,
or arc tangent of the number.
(expt <x-expr> <y-expr>) COMPUTE X TO THE Y POWER
<x-expr> the number
<y-expr> the exponent
returns x to the y power. If y is a fixnum, then the result type is
the same as the type of x, unless fixnum or ratio and it
would overflow, then the result type is a flonum.
(exp <x-expr>) COMPUTE E TO THE X POWER
<x-expr> the floating point number
returns e to the x power
(cis <x-expr>) COMPUTE COSINE + I SINE
Defined in common.lsp
<x-expr> the number
returns e to the ix power
(log <expr> [<base>]) COMPUTE THE LOGRITHM
Part of the math extension
<expr> the number
<base> the base, default is e
returns log base <base> of <expr>
(sqrt <expr>) COMPUTE THE SQUARE ROOT OF A NUMBER
<expr> the number
returns the square root of the number
(numerator <expr>) GET THE NUMERATOR OF A NUMBER
Part of math extension
<expr> rational number
returns numerator of number (number if integer)
(denominator <expr>) GET THE DENOMINATOR OF A NUMBER
Part of math extension
<expr> rational number
returns denominator of number (1 if integer)
XLISP 2.1e ARITHMETIC FUNCTIONS Page 47
(complex <real> [<imag>]) CONVERT TO COMPLEX NUMBER
Part of math extension
<real> real number real part
<imag> real number imaginary part (default 0)
returns the complex number
(realpart <expr>) GET THE REAL PART OF A NUMBER
Part of the math extension
<expr> the number
returns the real part of a complex number, or the number itself if a
real number
(imagpart <expr>) GET THE IMAGINARY PART OF A NUMBER
Part of the math extension
<expr> the number
returns the imaginary part of a complex number, or zero of the type
of the number if a real number.
(conjugate <expr>) GET THE CONJUGATE OF A NUMBER
Part of the math extension
<expr> the number
returns the conjugate of a complex number, or the number itself if a
real number.
(phase <expr>) GET THE PHASE OF A NUMBER
Part of the math extension
<expr> the number
returns the phase angle, equivalent to (atan (imagpart <expr>)
(realpart <expr>))
(< <n1> <n2>...) TEST FOR LESS THAN
(<= <n1> <n2>...) TEST FOR LESS THAN OR EQUAL TO
(= <n1> <n2>...) TEST FOR EQUAL TO
(/= <n1> <n2>...) TEST FOR NOT EQUAL TO
(>= <n1> <n2>...) TEST FOR GREATER THAN OR EQUAL TO
(> <n1> <n2>...) TEST FOR GREATER THAN
<n1> the first real number to compare
<n2> the second real number to compare
returns the result of comparing <n1> with <n2>...
XLISP 2.1e BITWISE LOGICAL FUNCTIONS Page 48
BITWISE LOGICAL FUNCTIONS
(logand [<expr>...]) THE BITWISE AND OF A LIST OF INTEGERS
With no arguments returns identity -1
<expr> the integers
returns the result of the and operation
(logior [<expr>...]) THE BITWISE INCLUSIVE OR OF A LIST OF INTEGERS
With no arguments returns identity 0
<expr> the integers
returns the result of the inclusive or operation
(logxor [<expr>...]) THE BITWISE EXCLUSIVE OR OF A LIST OF INTEGERS
With no arguments returns identity 0
<expr> the integers
returns the result of the exclusive or operation
(lognot <expr>) THE BITWISE NOT OF A INTEGER
<expr> the integer
returns the bitwise inversion of integer
(logtest <expr1> <expr2>) TEST BITWISE AND OF TWO INTEGERS
Defined in common.lsp
<expr1> the first integer
<expr2> the second integer
returns T if the result of the and operation is non-zero, else NIL
(ash <expr1> <expr2>) ARITHMETIC SHIFT
Part of math extension
<expr1> integer to shift
<expr2> number of bit positions to shift (positive is to left)
returns shifted integer
XLISP 2.1e STRING FUNCTIONS Page 49
STRING FUNCTIONS
Note: functions with names starting "string" will also accept a symbol, in
which case the symbol's print name is used.
(string <expr>) MAKE A STRING FROM AN INTEGER ASCII VALUE
<expr> an integer (which is first converted into its ASCII
character value), string, character, or symbol
returns the string representation of the argument
(string-trim <bag> <str>) TRIM BOTH ENDS OF A STRING
<bag> a string containing characters to trim
<str> the string to trim
returns a trimed copy of the string
(string-left-trim <bag> <str>) TRIM THE LEFT END OF A STRING
<bag> a string containing characters to trim
<str> the string to trim
returns a trimed copy of the string
(string-right-trim <bag> <str>) TRIM THE RIGHT END OF A STRING
<bag> a string containing characters to trim
<str> the string to trim
returns a trimed copy of the string
(string-upcase <str> &key :start :end) CONVERT TO UPPERCASE
<str> the string
:start the starting offset
:end the ending offset + 1 or NIL for end of string
returns a converted copy of the string
(string-downcase <str> &key :start :end) CONVERT TO LOWERCASE
<str> the string
:start the starting offset
:end the ending offset + 1 or NIL for end of string
returns a converted copy of the string
(nstring-upcase <str> &key :start :end) CONVERT TO UPPERCASE
<str> the string
:start the starting offset
:end the ending offset + 1 or NIL for end of string
returns the converted string (not a copy)
(nstring-downcase <str> &key :start :end) CONVERT TO LOWERCASE
<str> the string
:start the starting offset
:end the ending offset + 1 or NIL for end of string
returns the converted string (not a copy)
XLISP 2.1e STRING FUNCTIONS Page 50
(strcat <expr>...) CONCATENATE STRINGS
Macro in init.lsp, to maintain compatibility with XLISP.
See CONCATENATE for preferred function.
<expr> the strings to concatenate
returns the result of concatenating the strings
(string< <str1> <str2> &key :start1 :end1 :start2 :end2)
(string<= <str1> <str2> &key :start1 :end1 :start2 :end2)
(string= <str1> <str2> &key :start1 :end1 :start2 :end2)
(string/= <str1> <str2> &key :start1 :end1 :start2 :end2)
(string>= <str1> <str2> &key :start1 :end1 :start2 :end2)
(string> <str1> <str2> &key :start1 :end1 :start2 :end2)
<str1> the first string to compare
<str2> the second string to compare
:start1 first substring starting offset
:end1 first substring ending offset + 1 or NIL for end of string
:start2 second substring starting offset
:end2 second substring ending offset + 1 or NIL for end of string
returns string=: t if predicate is true, NIL otherwise
others: If predicate is true then number of initial matching
characters, else NIL
Note: case is significant with these comparison functions.
(string-lessp <str1> <str2> &key :start1 :end1 :start2 :end2)
(string-not-greaterp <str1> <str2> &key :start1 :end1 :start2 :end2)
(string-equal <str1> <str2> &key :start1 :end1 :start2 :end2)
(string-not-equal <str1> <str2> &key :start1 :end1 :start2 :end2)
(string-not-lessp <str1> <str2> &key :start1 :end1 :start2 :end2)
(string-greaterp <str1> <str2> &key :start1 :end1 :start2 :end2)
<str1> the first string to compare
<str2> the second string to compare
:start1 first substring starting offset
:end1 first substring ending offset + 1 or NIL for end of string
:start2 second substring starting offset
:end2 second substring ending offset + 1 or NIL for end of string
returns string-equal: t if predicate is true, NIL otherwise
others: If predicate is true then number of initial matching
characters, else NIL
Note: case is not significant with these comparison functions -- all
uppercase characters are converted to lowercase before being compared.
XLISP 2.1e CHARACTER FUNCTIONS Page 51
CHARACTER FUNCTIONS
(char <string> <index>) EXTRACT A CHARACTER FROM A STRING
<string> the string
<index> the string index (zero relative)
returns the ascii code of the character
(alphanumericp <chr>) IS THIS CHARACTER ALPHANUMERIC?
<chr> the character
returns true if the character is alphabetic or numeric, NIL
otherwise
(upper-case-p <chr>) IS THIS AN UPPER CASE CHARACTER?
<chr> the character
returns true if the character is upper case, NIL otherwise
(lower-case-p <chr>) IS THIS A LOWER CASE CHARACTER?
<chr> the character
returns true if the character is lower case, NIL otherwise
(alpha-char-p <chr>) IS THIS AN ALPHABETIC CHARACTER?
<chr> the character
returns true if the character is alphabetic, NIL otherwise
(both-case-p <chr>) IS THIS AN ALPHABETIC (EITHER CASE) CHARACTER?
<chr> the character
returns true if the character is available in both cases, NIL
otherwise
(digit-char-p <chr>) IS THIS A DIGIT CHARACTER?
<chr> the character
returns the digit weight if character is a digit, NIL otherwise
(char-code <chr>) GET THE ASCII CODE OF A CHARACTER
<chr> the character
returns the ASCII character code (integer, parity bit stripped)
(code-char <code>) GET THE CHARACTER WITH A SPECFIED ASCII CODE
<code> the ASCII code (integer, range 0-127)
returns the character with that code or NIL
(char-upcase <chr>) CONVERT A CHARACTER TO UPPER CASE
<chr> the character
returns the upper case version of the character, if one exists,
otherwise returns the character
(char-downcase <chr>) CONVERT A CHARACTER TO LOWER CASE
<chr> the character
returns the lower case version of the character, if one exists,
otherwise returns the character
XLISP 2.1e CHARACTER FUNCTIONS Page 52
(digit-char <n>) CONVERT A DIGIT WEIGHT TO A DIGIT
<n> the digit weight (integer)
returns the digit character or NIL
(char-int <chr>) CONVERT A CHARACTER TO AN INTEGER
<chr> the character
returns the ASCII character code (range 0-255)
(int-char <int>) CONVERT AN INTEGER TO A CHARACTER
<int> the ASCII character code (treated modulo 256)
returns the character with that code
(char< <chr1> <chr2>...)
(char<= <chr1> <chr2>...)
(char= <chr1> <chr2>...)
(char/= <chr1> <chr2>...)
(char>= <chr1> <chr2>...)
(char> <chr1> <chr2>...)
<chr1> the first character to compare
<chr2> the second character(s) to compare
returns t if predicate is true, NIL otherwise
Note: case is significant with these comparison functions.
(char-lessp <chr1> <chr2>...)
(char-not-greaterp <chr1> <chr2>...)
(char-equal <chr1> <chr2>...)
(char-not-equal <chr1> <chr2>...)
(char-not-lessp <chr1> <chr2>...)
(char-greaterp <chr1> <chr2>...)
<chr1> the first string to compare
<chr2> the second string(s) to compare
returns t if predicate is true, NIL otherwise
Note: case is not significant with these comparison functions -- all
uppercase characters are converted to lowercase before the comparison.
XLISP 2.1e STRUCTURE FUNCTIONS Page 53
STRUCTURE FUNCTIONS
XLISP provides a subset of the Common Lisp structure definition facility.
No slot options are allowed, but slots can have default initialization
expressions.
(defstruct name <slot-desc>...)
or
(defstruct (name <option>...) <slot-desc>...)
fsubr
<name> the structure name symbol (quoted)
<option> option description (quoted)
<slot-desc> slot descriptions (quoted)
returns the structure name
The recognized options are:
(:conc-name name)
(:include name [<slot-desc>...])
(:print-function <function>)
Note that if :CONC-NAME appears, it should be before :INCLUDE.
Each slot description takes the form:
<name>
or
(<name> <defexpr>)
If the default initialization expression is not specified, the slot will be
initialized to NIL if no keyword argument is passed to the creation
function.
The optional :PRINT-FUNCTION overrides the default #S notation. The
function must take three arguments, the structure instance, the stream, and
the current printing depth.
DEFSTRUCT causes access functions to be created for each of the slots and
also arranges that SETF will work with those access functions. The access
function names are constructed by taking the structure name, appending a
'-' and then appending the slot name. This can be overridden by using the
:CONC-NAME option.
DEFSTRUCT also makes a creation function called MAKE-<structname>, a copy
function called COPY-<structname> and a predicate function called
<structname>-P. The creation function takes keyword arguments for each of
the slots. Structures can be created using the #S( read macro, as well.
The property *struct-slots* is added to the symbol that names the
structure. This property consists of an association list of slot names and
XLISP 2.1e STRUCTURE FUNCTIONS Page 54
closures that evaluate to the initial values (NIL if no initial value
expression).
For instance:
(defstruct foo bar (gag 2))
creates the following functions:
(foo-bar <expr>)
(setf (foo-bar <expr>) <value>)
(foo-gag <expr>)
(setf (foo-gag <expr>) <value>)
(make-foo &key :bar :gag)
(copy-foo <expr>)
(foo-p <expr>)
XLISP 2.1e OBJECT FUNCTIONS Page 55
OBJECT FUNCTIONS
Note that the functions provided in classes.lsp are useful but not
necessary.
Messages defined for Object and Class are listed starting on page 19.
(send <object> <message> [<args>...]) SEND A MESSAGE
<object> the object to receive the message
<message> message sent to object
<args> arguments to method (if any)
returns the result of the method
(send-super <message> [<args>]) SEND A MESSAGE TO SUPERCLASS
valid only in method context
<message> message sent to method's superclass
<args> arguments to method (if any)
returns the result of the method
(defclass <sym> <ivars> [<cvars> [<super>]]) DEFINE A NEW CLASS
defined in class.lsp as a macro
<sym> symbol whose value is to be bound to the class object
(quoted)
<ivars> list of instance variables (quoted). Instance variables
specified either as <ivar> or (<ivar> <init>) to specify
non-NIL default initial value.
<cvars> list of class variables (quoted)
<super> superclass, or Object if absent.
This function sends :SET-PNAME (defined in classes.lsp) to the new
class to set the class' print name instance variable.
Methods defined for classes defined with defclass:
(send <object> :<ivar>)
Returns the specified instance variable
(send <object> :SET-IVAR <ivar> <value>)
Used to set an instance variable, typically with setf.
(send <sym> :NEW {:<ivar> <init>})
Actually definition for :ISNEW. Creates new object
initializing instance variables as specified in keyword
arguments, or to their default if keyword argument is
missing. Returns the object.
(defmethod <class> <sym> <fargs> <expr> ...) DEFINE A NEW METHOD
defined in class.lsp as a macro
<class> Class which will respond to message
<sym> Message name (quoted)
<fargs> Formal argument list. Leading "self" is implied (quoted)
<expr> Expressions constituting body of method (quoted)
returns the class object.
XLISP 2.1e OBJECT FUNCTIONS Page 56
(definst <class> <sym> [<args>...]) DEFINE A NEW GLOBAL INSTANCE
defined in class.lsp as a macro
<class> Class of new object
<sym> Symbol whose value will be set to new object
<args> Arguments passed to :NEW (typically initial values for
instance variables)
XLISP 2.1e PREDICATE FUNCTIONS Page 57
PREDICATE FUNCTIONS
(atom <expr>) IS THIS AN ATOM?
<expr> the expression to check
returns t if the value is an atom, NIL otherwise
(symbolp <expr>) IS THIS A SYMBOL?
<expr> the expression to check
returns t if the expression is a symbol, NIL otherwise
(numberp <expr>) IS THIS A NUMBER?
<expr> the expression to check
returns t if the expression is a number, NIL otherwise
(null <expr>) IS THIS AN EMPTY LIST?
<expr> the list to check
returns t if the list is empty, NIL otherwise
(not <expr>) IS THIS FALSE?
<expr> the expression to check
return t if the value is NIL, NIL otherwise
(listp <expr>) IS THIS A LIST?
<expr> the expression to check
returns t if the value is a cons or NIL, NIL otherwise
(endp <list>) IS THIS THE END OF A LIST?
<list> the list
returns t if the value is NIL, NIL otherwise
(consp <expr>) IS THIS A NON-EMPTY LIST?
<expr> the expression to check
returns t if the value is a cons, NIL otherwise
(constantp <expr>) IS THIS A CONSTANT?
<expr> the expression to check
returns t if the value is a constant (basically, would EVAL <expr>
repeatedly return the same thing?), NIL otherwise.
(integerp <expr>) IS THIS AN INTEGER?
<expr> the expression to check
returns t if the value is an integer, NIL otherwise
(floatp <expr>) IS THIS A FLOAT?
<expr> the expression to check
returns t if the value is a float, NIL otherwise
XLISP 2.1e PREDICATE FUNCTIONS Page 58
(rationalp <expr>) IS THIS A RATIONAL NUMBER?
Part of math extension.
<expr> the expression to check
returns t if the value is rational (integer or ratio), NIL otherwise
(complexp <expr>) IS THIS A COMPLEX NUMBER?
Part of math extension.
<expr> the expression to check
returns t if the value is a complex number, NIL otherwise
(stringp <expr>) IS THIS A STRING?
<expr> the expression to check
returns t if the value is a string, NIL otherwise
(characterp <expr>) IS THIS A CHARACTER?
<expr> the expression to check
returns t if the value is a character, NIL otherwise
(arrayp <expr>) IS THIS AN ARRAY?
<expr> the expression to check
returns t if the value is an array, NIL otherwise
(streamp <expr>) IS THIS A STREAM?
<expr> the expression to check
returns t if the value is a stream, NIL otherwise
(open-stream-p <stream>) IS STREAM OPEN?
<stream> the stream
returns t if the stream is open, NIL otherwise
(input-stream-p <stream>) IS STREAM READABLE?
<stream> the stream
returns t if stream is readable, NIL otherwise
(output-stream-p <stream>) IS STREAM WRITABLE?
<stream> the stream
returns t if stream is writable, NIL otherwise
(objectp <expr>) IS THIS AN OBJECT?
<expr> the expression to check
returns t if the value is an object, NIL otherwise
(classp <expr>) IS THIS A CLASS OBJECT?
<expr> the expression to check
returns t if the value is a class object, NIL otherwise
(boundp <sym>) IS A VALUE BOUND TO THIS SYMBOL?
<sym> the symbol
returns t if a value is bound to the symbol, NIL otherwise
XLISP 2.1e PREDICATE FUNCTIONS Page 59
(fboundp <sym>) IS A FUNCTIONAL VALUE BOUND TO THIS SYMBOL?
<sym> the symbol
returns t if a functional value is bound to the symbol, NIL
otherwise
(functionp <sym>) IS THIS A FUNCTION?
Defined in common.lsp
<expr> the expression to check
returns t if the value is a function -- that is, can it be applied
to arguments. This is true for any symbol (even those with
no function binding), list with car being lambda, a closure,
or subr. Otherwise returns NIL.
(minusp <expr>) IS THIS NUMBER NEGATIVE?
<expr> the number to test
returns t if the number is negative, NIL otherwise
(zerop <expr>) IS THIS NUMBER ZERO?
<expr> the number to test
returns t if the number is zero, NIL otherwise
(plusp <expr>) IS THIS NUMBER POSITIVE?
<expr> the number to test
returns t if the number is positive, NIL otherwise
(evenp <expr>) IS THIS INTEGER EVEN?
<expr> the integer to test
returns t if the integer is even, NIL otherwise
(oddp <expr>) IS THIS INTEGER ODD?
<expr> the integer to test
returns t if the integer is odd, NIL otherwise
(subsetp <list1> <list2> &key :test :test-not :key) IS SET A SUBSET?
<list1> the first list
<list2> the second list
:test test function (defaults to eql)
:test-not test function (sense inverted)
:key function to apply to test function arguments (defaults to
identity)
returns t if every element of the first list is in the second list,
NIL otherwise
XLISP 2.1e PREDICATE FUNCTIONS Page 60
(eq <expr1> <expr2>) ARE THE EXPRESSIONS EQUAL?
(eql <expr1> <expr2>)
(equal <expr1> <expr2>)
(equalp <expr1> <expr2>)
equalp defined in common.lsp
<expr1> the first expression
<expr2> the second expression
returns t if equal, NIL otherwise. Each is progressively more
liberal in what is "equal":
eq: identical pointers -- works with characters, symbols,
and arbitrarily small integers
eql: works with all numbers, if same type (see also = on
page 47)
equal: lists and strings
equalp: case insensitive characters (and strings), numbers
of differing types, arrays (which can be equalp to
string containing same elements)
(typep <expr> <type>) IS THIS A SPECIFIED TYPE?
<expr> the expression to test
<type> the type specifier. Symbols can either be one of those
listed under type-of (on page 81) or one of:
ATOM any atom
NULL NIL
LIST matches NIL or any cons cell
STREAM any stream
NUMBER any number type
RATIONAL fixnum or ratio (math extension)
STRUCT any structure (except hash-table)
FUNCTION any function, as defined by functionp (page 59)
The specifer can also be a form (which can be nested). All
form elements are quoted. Valid form cars:
or any of the cdr type specifiers must be true
and all of the cdr type specifiers must be true
not the single cdr type specifier must be false
satisfies the result of applying the cdr predicate function
to <expr>
member <expr> must be eql to one of the cdr values
object <expr> must be an object, of class specified by
the single cdr value. The cdr value can be a
symbol which must evaluate to a class.
Note that everything is of type T, and nothing is of type
NIL.
returns t if <expr> is of type <type>, NIL otherwise.
XLISP 2.1e CONTROL CONSTRUCTS Page 61
CONTROL CONSTRUCTS
(cond <pair>...) EVALUATE CONDITIONALLY
fsubr
<pair> pair consisting of:
(<pred> <expr>...)
where
<pred> is a predicate expression
<expr> evaluated if the predicate is not NIL
returns the value of the first expression whose predicate is not NIL
(and <expr>...) THE LOGICAL AND OF A LIST OF EXPRESSIONS
fsubr
<expr> the expressions to be ANDed
returns NIL if any expression evaluates to NIL, otherwise the value
of the last expression (evaluation of expressions stops
after the first expression that evaluates to NIL)
(or <expr>...) THE LOGICAL OR OF A LIST OF EXPRESSIONS
fsubr
<expr> the expressions to be ORed
returns NIL if all expressions evaluate to NIL, otherwise the value
of the first non-NIL expression (evaluation of expressions
stops after the first expression that does not evaluate to
NIL)
(if <texpr> <expr1> [<expr2>]) EVALUATE EXPRESSIONS CONDITIONALLY
fsubr
<texpr> the test expression
<expr1> the expression to be evaluated if texpr is non-NIL
<expr2> the expression to be evaluated if texpr is NIL
returns the value of the selected expression
(when <texpr> <expr>...) EVALUATE ONLY WHEN A CONDITION IS TRUE
fsubr
<texpr> the test expression
<expr> the expression(s) to be evaluted if texpr is non-NIL
returns the value of the last expression or NIL
(unless <texpr> <expr>...) EVALUATE ONLY WHEN A CONDITION IS FALSE
fsubr
<texpr> the test expression
<expr> the expression(s) to be evaluated if texpr is NIL
returns the value of the last expression or NIL
XLISP 2.1e CONTROL CONSTRUCTS Page 62
(case <expr> <case>...[(t <expr>)]) SELECT BY CASE
fsubr
<expr> the selection expression
<case> pair consisting of:
(<value> <expr>...)
where:
<value> is a single expression or a list of expressions
(unevaluated)
<expr> are expressions to execute if the case matches
(t <expr>) default case (no previous matching)
returns the value of the last expression of the matching case
(let (<binding>...) <expr>...) CREATE LOCAL BINDINGS
(let* (<binding>...) <expr>...) LET WITH SEQUENTIAL BINDING
fsubr
<binding> the variable bindings each of which is either:
1) a symbol (which is initialized to NIL)
2) a list whose car is a symbol and whose cadr is an
initialization expression
<expr> the expressions to be evaluated
returns the value of the last expression
(flet (<binding>...) <expr>...) CREATE LOCAL FUNCTIONS
(labels (<binding>...) <expr>...) FLET WITH RECURSIVE FUNCTIONS
(macrolet (<binding>...) <expr>...) CREATE LOCAL MACROS
fsubr
<binding> the function bindings each of which is:
(<sym> <fargs> <expr>...)
where:
<sym> the function/macro name
<fargs> formal argument list (lambda list)
<expr> expressions constituting the body of the
function/macro
<expr> the expressions to be evaluated
returns the value of the last expression
(catch <sym> <expr>...) EVALUATE EXPRESSIONS AND CATCH THROWS
fsubr
<sym> the catch tag
<expr> expressions to evaluate
returns the value of the last expression the throw expression
(throw <sym> [<expr>]) THROW TO A CATCH
fsubr
<sym> the catch tag
<expr> the value for the catch to return (defaults to NIL)
returns never returns
XLISP 2.1e CONTROL CONSTRUCTS Page 63
(unwind-protect <expr> <cexpr>...) PROTECT EVALUATION OF AN EXPRESSION
fsubr
<expr> the expression to protect
<cexpr> the cleanup expressions
returns the value of the expression
Note: unwind-protect guarantees to execute the cleanup expressions
even if a non-local exit terminates the evaluation of the protected
expression
XLISP 2.1e LOOPING CONSTRUCTS Page 64
LOOPING CONSTRUCTS
(loop <expr>...) BASIC LOOPING FORM
fsubr
<expr> the body of the loop
returns never returns (must use non-local exit, such as RETURN)
(do (<binding>...) (<texpr> <rexpr>...) <expr>...) GENERAL LOOPING FORM
(do* (<binding>...) (<texpr> <rexpr>...) <expr>...)
fsubr. do binds simultaneously, do* binds sequentially
<binding> the variable bindings each of which is either:
1) a symbol (which is initialized to NIL)
2) a list of the form: (<sym> <init> [<step>])
where:
<sym> is the symbol to bind
<init> the initial value of the symbol
<step> a step expression
<texpr> the termination test expression
<rexpr> result expressions (the default is NIL)
<expr> the body of the loop (treated like an implicit prog)
returns the value of the last result expression
(dolist (<sym> <expr> [<rexpr>]) <expr>...) LOOP THROUGH A LIST
fsubr
<sym> the symbol to bind to each list element
<expr> the list expression
<rexpr> the result expression (the default is NIL)
<expr> the body of the loop (treated like an implicit prog)
returns the result expression
(dotimes (<sym> <expr> [<rexpr>]) <expr>...) LOOP FROM ZERO TO N-1
fsubr
<sym> the symbol to bind to each value from 0 to n-1
<expr> the number of times to loop
<rexpr> the result expression (the default is NIL)
<expr> the body of the loop (treated like an implicit prog)
returns the result expression
XLISP 2.1e THE PROGRAM FEATURE Page 65
THE PROGRAM FEATURE
(prog (<binding>...) <expr>...) THE PROGRAM FEATURE
(prog* (<binding>...) <expr>...) PROG WITH SEQUENTIAL BINDING
fsubr -- equivalent to (let () (block NIL (tagbody ...)))
<binding> the variable bindings each of which is either:
1) a symbol (which is initialized to NIL)
2) a list whose car is a symbol and whose cadr is an
initialization expression
<expr> expressions to evaluate or tags (symbols)
returns NIL or the argument passed to the return function
(block <name> <expr>...) NAMED BLOCK
fsubr
<name> the block name (quoted symbol)
<expr> the block body
returns the value of the last expression
(return [<expr>]) CAUSE A PROG CONSTRUCT TO RETURN A VALUE
fsubr
<expr> the value (defaults to NIL)
returns never returns
(return-from <name> [<value>]) RETURN FROM A NAMED BLOCK OR FUNCTION
fsubr. In xlisp, the names are dynamically scoped.
<name> the block or function name (quoted symbol). If name is NIL,
use function RETURN.
<value> the value to return (defaults to NIL)
returns never returns
(tagbody <expr>...) BLOCK WITH LABELS
fsubr
<expr> expression(s) to evaluate or tags (symbols)
returns NIL
(go <sym>) GO TO A TAG WITHIN A TAGBODY
fsubr. In xlisp, tags are dynamically scoped.
<sym> the tag (quoted)
returns never returns
(progv <slist> <vlist> <expr>...) DYNAMICALLY BIND SYMBOLS
fsubr
<slist> list of symbols (evaluated)
<vlist> list of values to bind to the symbols (evaluated)
<expr> expression(s) to evaluate
returns the value of the last expression
XLISP 2.1e THE PROGRAM FEATURE Page 66
(prog1 <expr1> <expr>...) EXECUTE EXPRESSIONS SEQUENTIALLY
fsubr
<expr1> the first expression to evaluate
<expr> the remaining expressions to evaluate
returns the value of the first expression
(prog2 <expr1> <expr2> <expr>...) EXECUTE EXPRESSIONS SEQUENTIALLY
fsubr
<expr1> the first expression to evaluate
<expr2> the second expression to evaluate
<expr> the remaining expressions to evaluate
returns the value of the second expression
(progn <expr>...) EXECUTE EXPRESSIONS SEQUENTIALLY
fsubr
<expr> the expressions to evaluate
returns the value of the last expression (or NIL)
XLISP 2.1e INPUT/OUTPUT FUNCTIONS Page 67
INPUT/OUTPUT FUNCTIONS
Note that when printing objects, printing is accomplished by sending the
message :prin1 to the object.
(read [<stream> [<eof> [<rflag>]]]) READ AN EXPRESSION
<stream> the input stream (default, or NIL, is *standard-input*, T is
*terminal-io*)
<eof> the value to return on end of file (default is NIL)
<rflag> recursive read flag. The value is ignored
returns the expression read
(set-macro-character <ch> <fcn> [ T ]) MODIFY READ TABLE
defined in init.lsp
<ch> character to define
<fcn> function to bind to character (see page 12)
T if TMACRO rather than NMACRO
(get-macro-character <ch>) EXAMINE READ TABLE
defined in init.lsp
<ch> character
returns function bound to character
(print <expr> [<stream>]) PRINT AN EXPRESSION ON A NEW LINE
The expression is printed using prin1, then current line is terminated
(Note: this is backwards from Common Lisp).
<expr> the expression to be printed
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns the expression
(prin1 <expr> [<stream>]) PRINT AN EXPRESSION
symbols, cons cells (without circularities), arrays, strings, numbers,
and characters are printed in a format generally acceptable to the
read function. Printing format can be affected by the global
formatting variables: *print-level* and *print-length* for lists and
arrays, *integer-format* for fixnums, *float-format* for flonums,
*ratio-format* for ratios, and *print-case* and *readtable-case* for
symbols.
<expr> the expression to be printed
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns the expression
XLISP 2.1e INPUT/OUTPUT FUNCTIONS Page 68
(princ <expr> [<stream>]) PRINT AN EXPRESSION WITHOUT QUOTING
Like PRIN1 except symbols (including uninterned), strings, and
characters are printed without using any quoting mechanisms.
<expr> the expressions to be printed
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns the expression
(pprint <expr> [<stream>]) PRETTY PRINT AN EXPRESSION
Uses prin1 for printing.
<expr> the expressions to be printed
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns the expression
(terpri [<stream>]) TERMINATE THE CURRENT PRINT LINE
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns NIL
(fresh-line [<stream>]) START A NEW LINE
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns t if a new list was started, NIL if already at the start of
a line.
(flatsize <expr>) LENGTH OF PRINTED REPRESENTATION USING PRIN1
<expr> the expression
returns the length
(flatc <expr>) LENGTH OF PRINTED REPRESENTATION USING PRINC
<expr> the expression
returns the length
(y-or-n-p [<fmt> [<arg>...]]) ASK A YES OR NO QUESTION
defined in common.lsp. Uses *terminal-io* stream for interaction.
<fmt> optional format string for question (see page 69)
<arg> arguments, if any, for format string
returns T for yes, NIL for no.
XLISP 2.1e THE FORMAT FUNCTION Page 69
THE FORMAT FUNCTION
(format <stream> <fmt> [<arg>...]) DO FORMATTED OUTPUT
<stream> the output stream (T is *standard-output*)
<fmt> the format string
<arg> the format arguments
returns output string if <stream> is NIL, NIL otherwise
The format string can contain characters that should be copied directly to
the output and formatting directives. The formatting directives are:
~A or ~a print next argument using princ
~S or ~s print next argument using prin1
~D or ~d print next argument integer
~E or ~e print next argument in exponential form
~F or ~f print next argument in fixed point form
~G or ~g print next argument using either ~E or ~F depending on
magnitude
~% start a new line
~& start a new line if not on a new line
~t or ~T go to a specified column
~~ print a tilde character
~\n ignore return and following whitespace
The format directives can contain optional prefix and optional colon (:) or
at-sign (@) modifiers between the tilde and directive character. Prefix
characters are unsigned integers, or the character 'v' to indicate the
number is taken from the next argument, or a single quote (') followed by a
single character for those parameters that should be a single character.
For ~A and ~S the full form is:
~mincol,colinc,minpad,padchar:@A (or S)
If : is given, NIL will print as "()" rather than "NIL". The string is
padded on the right (or left, if @ is given) with at least "minpad" copies
of the "padchar". Padding characters are then inserted "colinc" characters
at a time until the total width is at least "mincol". The defaults are 0
for mincol and minpad, 1 for colinc, and #\space for padchar. For example:
~15,,2,'.@A
The output is padded on the left with at least 2 periods until the output
is at least 15 characters wide.
For ~D the full form is:
~mincol,padchar@D
XLISP 2.1e THE FORMAT FUNCTION Page 70
If the argument is not a FIXNUM, then the format "~mincolA" is used. If
"mincol" is specified then the number is padded on the left to be at least
that many characters long using "padchar". "padchar" defaults to #\space.
If @ is used and the value is positive, then a leading plus sign is printed
before the first digit.
For ~E ~F and ~G the full form is:
~mincol,round,padchar@E (or F or G)
(This implementation is not Common Lisp compatible.) If the argument is not
a real number (FIXNUM, RATIO, or FLONUM), then the format
"~mincol,padcharD" is used. The number is printed using the C language e,
f, or g formats. If the number could potentially take more than 100 digits
to print, then F format is forced to E format, although some C libraries
will do this at a lower number of digits. If "round" is specified, than
that is the number of digits to the right of the decimal point that will be
printed, otherwise six digits (or whatever is necessary in G format) are
printed. In G format, trailing zeroes are deleted and exponential notation
is used if the exponent of the number is greater than the precision or less
than -4. If the @ modifier is used, a leading plus sign is printed before
positive values. If "mincol" is specified, the number is padded on the left
to be at least "mincol" characters long using "padchar". "padchar" defaults
to #\space.
For ~% and ~~, the full form is ~n% or ~n~. "n" copies (default=1) of the
character are output.
For ~&, the full form is ~n&. ~0& does nothing. Otherwise enough new line
characters are emited to move down to the "n"th new line (default=1).
For ~T, the full form is:
~count,tabwidth@T
The cursor is moved to column "count" (default 1). If the cursor is
initially at count or beyond, then the cursor is moved forward to the next
position that is a multiple of "tabwidth" (default 1) columns beyond count.
When the @ modifier is used, then positioning is relative. "count" spaces
are printed, then additional spaces are printed to make the column number
be a multiple of "tabwidth". Note that column calcuations will be incorrect
if ASCII tab characters or ANSI cursor positioning sequences are used.
For ~\n, if the colon modifier is used, then the format directive is
ignored (allowing embedded returns in the source for enhanced readability).
If the at-sign modifier is used, then a carriage return is emitted, and
following whitespace is ignored.
XLISP 2.1e FILE I/O FUNCTIONS Page 71
FILE I/O FUNCTIONS
Note that initially, when starting XLISP-PLUS, there are six system stream
symbols which are associated with three streams. *TERMINAL-IO* is a special
stream that is bound to the keyboard and display, and allows for
interactive editing. *STANDARD-INPUT* is bound to standard input or to
*TERMINAL-IO* if not redirected. *STANDARD-OUTPUT* is bound to standard
output or to *TERMINAL-IO* if not redirected. *ERROR-OUTPUT* (error message
output), *TRACE-OUTPUT* (for TRACE and TIME functions), and *DEBUG-IO*
(break loop i/o, and messages) are all bound to *TERMINAL-IO*. Standard
input and output can be redirected on most systems.
File streams are printed using the #< format that cannot be read by the
reader. Console, standard input, standard output, and closed streams are
explicitly indicated. Other file streams will typically indicate the name
of the attached file.
When the transcript is active (either -t on the command line or the DRIBBLE
function), all characters that would be sent to the display via
*TERMINAL-IO* are also placed in the transcript file.
*TERMINAL-IO* should not be changed. Any other system streams that are
changed by an application should be restored to their original values.
(read-char [<stream>]) READ A CHARACTER FROM A STREAM
<stream> the input stream (default, or NIL, is *standard-input*, T is
*terminal-io*)
returns the character or NIL at end of file
(peek-char [<flag> [<stream>]]) PEEK AT THE NEXT CHARACTER
<flag> flag for skipping white space (default is NIL)
<stream> the input stream (default, or NIL, is *standard-input*, T is
*terminal-io*)
returns the character or NIL at end of file
(write-char <ch> [<stream>]) WRITE A CHARACTER TO A STREAM
<ch> the character to write
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns the character
(read-line [<stream>]) READ A LINE FROM A STREAM
<stream> the input stream (default, or NIL, is *standard-input*, T is
*terminal-io*)
returns the string excluding the #\newline, or NIL at end of file
XLISP 2.1e FILE I/O FUNCTIONS Page 72
(open <fname> &key :direction :element-type :if-exists :if-does-not-exist)
OPEN A FILE STREAM
The function OPEN has been significantly enhanced over original XLISP.
The original function only had the :direction keyword argument, which
could only have the values :input or :output. When used with the
:output keyword, it was equivalent to (open <fname> :direction :output
:if-exists :supersede). A maximum of ten files can be open at any one
time, including any files open via the LOAD, DRIBBLE, SAVE and RESTORE
commands. The open command may force a garbage collection to reclaim
file slots used by unbound file streams.
<fname> the file name string, symbol, or file stream created
via OPEN. In the last case, the name is used to open a
second stream on the same file -- this can cause
problems if one or more streams is used for writing.
:direction Read and write permission for stream (default is
:input).
:input Open file for read operations only.
:probe Open file for reading, then close it (use to test for
file existance)
:output Open file for write operations only.
:io Like :output, but reading also allowed.
:element-type FIXNUM or CHARACTER (default is CHARACTER), as returned
by type-of function (on page 81). Files opened with
type FIXNUM are binary files instead of ascii, which
means no crlf to/from lf conversion takes place, and
control-Z will not terminate an input file. It is the
intent of Common Lisp that binary files only be
accessed with read-byte and write-byte while ascii
files be accessed with any function but read-byte and
write-byte. XLISP does not enforce that distinction.
:if-exists action to take if file exists. Argument ignored for
:input (file is positioned at start) or :probe (file is
closed)
:error give error message
:rename rename file to generated backup name, then open a new
file of the original name. This is the default action
:new-version same as :rename
:overwrite file is positioned to start, original data intact
:append file is positioned to end
:supersede delete original file and open new file of the same name
:rename-and-delete same as :supersede
NIL close file and return NIL
:if-does-not-exist action to take if file does not exist.
:error give error message (default for :input, or :overwrite
or :append)
:create create a new file (default for :output or :io when not
:overwrite or :append)
NIL return NIL (default for :probe)
returns a file stream, or sometimes NIL
XLISP 2.1e FILE I/O FUNCTIONS Page 73
(close <stream>) CLOSE A FILE STREAM
The stream becomes a "closed stream." Note that unbound file streams
are closed automatically during a garbage collection.
<stream> the stream, which may be a string stream
returns t if stream closed, NIL if terminal (cannot be closed) or
already closed.
(delete-file <fname>) DELETE A FILE
<fname> file name string, symbol or a stream opened with OPEN
returns t if file does not exist or is deleted. If <fname> is a
stream, the stream is closed before the file is deleted. An
error occurs if the file cannot be deleted.
(truename <fname>) OBTAIN THE FILE PATH NAME
<fname> file name string, symbol, or a stream opened with OPEN
returns string representing the true file name (absolute path to
file).
(with-open-file (<var> <fname> [<karg>...]) [<expr>...])
EVALUATE USING A FILE
Defined in common.lsp as a macro. File will always be closed upon
completion
<var> symbol name to bind stream to while evaluating expresssions
(quoted)
<fname> file name string or symbol
<karg> keyword arguments for the implicit open command
<expr> expressions to evaluate while file is open (implicit progn)
returns value of last <expr>.
(read-byte [<stream>]) READ A BYTE FROM A STREAM
<stream> the input stream (default, or NIL, is *standard-input*, T is
*terminal-io*)
returns the byte (integer) or NIL at end of file
(write-byte <byte> [<stream>]) WRITE A BYTE TO A STREAM
<byte> the byte to write (integer)
<stream> the output stream (default, or NIL, is *standard-output*, T
is *terminal-io*)
returns the byte (integer)
(file-length <stream>) GET LENGTH OF FILE
For an ascii file, the length reported may be larger than the number
of characters read or written because of CR conversion.
<stream> the file stream (should be disk file)
returns length of file, or NIL if cannot be determined.
XLISP 2.1e FILE I/O FUNCTIONS Page 74
(file-position <stream> [<expr>]) GET OR SET FILE POSITION
For an ascii file, the file position may not be the same as the number
of characters read or written because of CR conversion. It will be
correct when using file-position to position a file at a location
earlier reported by file-position.
<stream> the file stream (should be a disk file)
<expr> desired file position, if setting position. Can also be
:start for start of file or :end for end of file.
returns if setting position, and successful, then T; if getting
position and successful then the position; otherwise NIL
XLISP 2.1e STRING STREAM FUNCTIONS Page 75
STRING STREAM FUNCTIONS
These functions operate on unnamed streams. An unnamed output stream
collects characters sent to it when it is used as the destination of any
output function. The functions 'get-output-stream' string and list return a
sting or list of the characters.
An unnamed input stream is setup with the 'make-string-input-stream'
function and returns each character of the string when it is used as the
source of any input function.
Note that there is no difference between unnamed input and output streams.
Unnamed input streams may be written to by output functions, in which case
the characters are appended to the tail end of the stream. Unnamed output
streams may also be (destructively) read by any input function as well as
the get-output-stream functions.
(make-string-input-stream <str> [<start> [<end>]])
<str> the string
<start> the starting offset
<end> the ending offset + 1 or NIL for end of string
returns an unnamed stream that reads from the string
(make-string-output-stream)
returns an unnamed output stream
(get-output-stream-string <stream>)
The output stream is emptied by this function
<stream> the output stream
returns the output so far as a string
(get-output-stream-list <stream>)
The output stream is emptied by this function
<stream> the output stream
returns the output so far as a list
(with-input-from-string (<var> <str> &key :start :end :index) [<expr>...])
Defined in common.lsp as a macro
<var> symbol that stream is bound to during execution of
expressions (quoted)
<str> the string
:start starting offset into string (default 0)
:end ending offset + 1 (default, or NIL, is end of string)
:index setf place form which gets final index into string after
last expression is executed (quoted)
<expr> expressions to evaluate (implicit progn)
returns the value of the last <expr>
XLISP 2.1e STRING STREAM FUNCTIONS Page 76
(with-output-to-string (<var>) [<expr>...])
Defined in common.lsp as a macro
<var> symbol that stream is bound to during execution of
expressions (quoted)
<expr> expressions to evaluate (implicit progn)
returns contents of stream, as a string
XLISP 2.1e DEBUGGING AND ERROR HANDLING Page 77
DEBUGGING AND ERROR HANDLING FUNCTIONS
(trace [<sym>...]) ADD A FUNCTION TO THE TRACE LIST
fsubr
<sym> the function(s) to add (quoted)
returns the trace list
(untrace [<sym>...]) REMOVE A FUNCTION FROM THE TRACE LIST
fsubr. If no functions given, all functions are removed from the trace
list.
<sym> the function(s) to remove (quoted)
returns the trace list
(error <emsg> [<arg>]) SIGNAL A NON-CORRECTABLE ERROR
<emsg> the error message string
<arg> the argument expression (printed after the message)
returns never returns
(cerror <cmsg> <emsg> [<arg>]) SIGNAL A CORRECTABLE ERROR
<cmsg> the continue message string
<emsg> the error message string
<arg> the argument expression (printed after the message)
returns NIL when continued from the break loop
(break [<bmsg> [<arg>]]) ENTER A BREAK LOOP
<bmsg> the break message string (defaults to "**BREAK**")
<arg> the argument expression (printed after the message)
returns NIL when continued from the break loop
(clean-up) CLEAN-UP AFTER AN ERROR
returns never returns
(top-level) CLEAN-UP AFTER AN ERROR AND RETURN TO THE TOP LEVEL
returns never returns
(continue) CONTINUE FROM A CORRECTABLE ERROR
returns never returns
(errset <expr> [<pflag>]) TRAP ERRORS
fsubr
<expr> the expression to execute
<pflag> flag to control printing of the error message (default t)
returns the value of the last expression consed with NIL or NIL on
error
(baktrace [<n>]) PRINT N LEVELS OF TRACE BACK INFORMATION
<n> the number of levels (defaults to all levels)
returns NIL
XLISP 2.1e DEBUGGING AND ERROR HANDLING Page 78
(evalhook <expr> <ehook> <ahook> [<env>]) EVALUATE WITH HOOKS
<expr> the expression to evaluate. <ehook> is not used at the top
level.
<ehook> the value for *evalhook*
<ahook> the value for *applyhook*
<env> the environment (default is NIL). The format is a dotted
pair of value (car) and function (cdr) binding lists. Each
binding list is a list of level binding a-lists, with the
innermost a-list first. The level binding a-list associates
the bound symbol with its value.
returns the result of evaluating the expression
(applyhook <fun> <arglist> <ehook> <ahook>) APPLY WITH HOOKS
<fun> The function closure. <ahook> is not used for this function
application.
<arglist> The list of arguments.
<ehook> the value for *evalhook*
<ahook> the value for *applyhook*
returns the result of applying <fun> to <arglist>
(debug) ENABLE DEBUG BREAKS
(nodebug) DISABLE DEBUG BREAKS
Defined in init.lsp
XLISP 2.1e SYSTEM FUNCTIONS Page 79
SYSTEM FUNCTIONS
(load <fname> &key :verbose :print) LOAD A SOURCE FILE
An implicit ERRSET exists in this function so that if error occurs
during loading, and *breakenable* is NIL, then the error message will
be printed and NIL will be returned. The OS environmental variable
XLPATH is used as a search path for files in this function. If the
filename does not contain path separators ('/' for UNIX, and either
'/' or '\' for MS-DOS) and XLPATH is defined, then each pathname in
XLPATH is tried in turn until a matching file is found. If no file is
found, then one last attempt is made in the current directory. The
pathnames are separated by either a space or semicolon, and a trailing
path separator character is optional.
<fname> the filename string, symbol, or a file stream created with
OPEN. The extension "lsp" is assumed.
:verbose the verbose flag (default is t)
:print the print flag (default is NIL)
returns t if successful, else NIL
(restore <fname>) RESTORE WORKSPACE FROM A FILE
The OS environmental variable XLPATH is used as a search path for
files in this function. See the note under function "load", above. The
standard system streams are restored to the defaults as of when
XLISP-PLUS was started. Files streams are restored in the same mode
they were created, if possible, and are positioned where they were at
the time of the save. If the files have been altered or moved since
the time of the save, the restore will not be completely successful.
Memory allocation will not be the same as the current settings of
ALLOC are used. Execution proceeds at the top-level read-eval-print
loop. The state of the transcript logging is not affected by this
function.
<fname> the filename string, symbol, or a file stream created with
OPEN. The extension "wks" is assumed.
returns NIL on failure, otherwise never returns
(save <fname>) SAVE WORKSPACE TO A FILE
You cannot save from within a load. Not all of the state may be saved
-- see "restore", above. By saving a workspace with the name "xlisp",
that workspace will be loaded automatically when you invoke
XLISP-PLUS.
<fname> the filename string, symbol, or a file stream created with
OPEN. The extension "wks" is assumed.
returns t if workspace was written, NIL otherwise
(savefun <fcn>) SAVE FUNCTION TO A FILE
defined in init.lsp
<fcn> function name (saves it to file of same name, with extension
".lsp")
returns t if successful
XLISP 2.1e SYSTEM FUNCTIONS Page 80
(dribble [<fname>]) CREATE A FILE WITH A TRANSCRIPT OF A SESSION
<fname> file name string, symbol, or file stream created with OPEN
(if missing, close current transcript)
returns t if the transcript is opened, NIL if it is closed
(gc) FORCE GARBAGE COLLECTION
returns NIL
(expand [<num>]) EXPAND MEMORY BY ADDING SEGMENTS
<num> the number of segments to add, default 1
returns the number of segments added
(alloc <num> [<num2>]) CHANGE SEGMENT SIZE
<num> the number of nodes to allocate
<num2> the number of pointer elements to allocate in an array
segment (when dynamic array allocation compiled). Default is
no change.
returns the old number of nodes to allocate
(room) SHOW MEMORY ALLOCATION STATISTICS
Statistics (which are sent to *STANDARD-OUTPUT*) include:
Nodes - number of nodes, free and used
Free nodes - number of free nodes
Segments - number of node segments, including those reserved
for characters and small integers.
Allocate - number of nodes to allocate in any new node
segments
Total - total memory bytes allocated for node segments,
arrays, and strings
Collections - number of garbage collections
When dynamic array allocation is compiled, the following additional
statistics are printed:
Vector nodes - number of pointers in arrays and (size
equivalent) strings
Vector free - free space in vector area (may be fragmented
across segments)
Vector segs - number of vector segments. Increases and
decreases as needed.
Vec allocate - number of pointer elements to allocate in any
new vector segment
returns NIL
(time <expr>) MEASURE EXECUTION TIME
fsubr.
<expr> the expression to evaluate
returns the result of the expression. The execution time is printed
to *TRACE-OUTPUT*
XLISP 2.1e SYSTEM FUNCTIONS Page 81
(get-internal-real-time) GET ELAPSED CLOCK TIME
(get-internal-run-time) GET ELAPSED EXECUTION TIME
returns integer time in system units (see
internal-time-units-per-second on page 22). meaning of
absolute values is system dependent.
(coerce <expr> <type>) FORCE EXPRESSION TO DESIGNATED TYPE
Sequences can be coerced into other sequences, single character
strings or symbols with single character printnames can be coerced
into characters, fixnums can be coerced into characters or flonums.
Ratios can be coerced into flonums. Flonums and ratios can be coerced
into complex (so can fixnums, but they turn back into fixnums).
<expr> the expression to coerce
<type> desired type, as returned by type-of (see page 81)
returns <expr> if type is correct, or converted object.
(type-of <expr>) RETURNS THE TYPE OF THE EXPRESSION
It is recommended that typep be used instead, as it is more general.
In the original XLISP, the value NIL was returned for NIL.
<expr> the expression to return the type of
returns One of the symbols:
LIST for NIL (lists, conses return CONS)
SYMBOL for symbols
OBJECT for objects
CONS for conses
SUBR for built-in functions
FSUBR for special forms
CLOSURE for defined functions
STRING for strings
FIXNUM for integers
RATIO for ratios
FLONUM for floating point numbers
COMPLEX for complex numbers
CHARACTER for characters
FILE-STREAM for file pointers
UNNAMED-STREAM for unnamed streams
ARRAY for arrays
HASH-TABLE for hash tables
sym for structures of type "sym"
(peek <addrs>) PEEK AT A LOCATION IN MEMORY
<addrs> the address to peek at (integer)
returns the value at the specified address (integer)
(poke <addrs> <value>) POKE A VALUE INTO MEMORY
<addrs> the address to poke (integer)
<value> the value to poke into the address (integer)
returns the value
XLISP 2.1e SYSTEM FUNCTIONS Page 82
(address-of <expr>) GET THE ADDRESS OF AN XLISP NODE
<expr> the node
returns the address of the node (integer)
(get-key) READ A KEYSTROKE FROM CONSOLE
OS dependent.
returns integer value of key (no echo)
(system <command>) EXECUTE A SYSTEM COMMAND
OS dependent -- not always available.
<command> Command string, if 0 length then spawn OS shell
returns T if successful (note that MS/DOS command.com always returns
success)
(exit) EXIT XLISP
returns never returns
(generic <expr>) CREATE A GENERIC TYPED COPY OF THE EXPRESSION
Note: added function, Tom Almy's creation for debugging xlisp.
<expr> the expression to copy
returns NIL if value is NIL and NILSYMBOL compilation option not
declared, otherwise if type is:
SYMBOL copy as an ARRAY
OBJECT copy as an ARRAY
CONS (CONS (CAR <expr>)(CDR <expr>))
CLOSURE copy as an ARRAY
STRING copy of the string
FIXNUM value
FLONUM value
RATIO value
CHARACTER value
UNNAMED-STREAM copy as a CONS
ARRAY copy of the array
COMPLEX copy as an ARRAY
HASH-TABLE copy as an ARRAY
structure copy as an ARRAY
The following graphic and display functions represent an extension by Tom
Almy:
(cls) CLEAR DISPLAY
Clear the display and position cursor at upper left corner.
returns nil
(cleol) CLEAR TO END OF LINE
Clears current line to end.
returns nil
XLISP 2.1e SYSTEM FUNCTIONS Page 83
(goto-xy [<column> <row>]) GET OR SET CURSOR POSITION
Cursor is repositioned if optional arguments are specified.
Coordinates are clipped to actual size of display.
<column> 0-based column (x coordinate)
<row> 0-based row (y coordinate)
returns list of original column and row positions
(color <value>) SET DRAWING COLOR
<value> Drawing color (not checked for validity)
returns <value>
(move <x1> <y1> [<x2> <y2> ...]) ABSOLUTE MOVE
(moverel <x1> <y2> [<x2> <y2> ...]) RELATIVE MOVE
For moverel, all coordinates are relative to the preceeding point.
<x1> <y1> Moves to point x1,y1 in anticipation of draw.
<x2> <y2> Draws to points specified in additional arguments.
returns T if succeeds, else NIL
(draw [<x1> <y1> ...]) ABSOLUTE DRAW
(drawrel [<x1> <y1> ...]) RELATIVE DRAW
For drawrel, all coordinates are relative to the preceeding point.
<x1> <y1> Point(s) drawn to, in order.
returns T if succeeds, else NIL
(mode <ax> [<bx> <width> <height>) SET DISPLAY MODE
Standard modes require only <ax> argument. Extended modes are "Super-
VGA" or "Super-EGA" and are display card specific. Not all XLISP
versions support all modes.
<ax> Graphic mode (value passed in register AX)
Common standard Modes:
0,1 - 40x25 text
2,3 - 80x25 text
4,5 - 320x200 4 color graphics (CGA)
6 - 640x200 monchrome graphics (CGA)
13 - 320x200 16 color graphics (EGA)
14 - 640x200 16 color graphics (EGA)
16 - 640x350 16 color graphics (EGA)
18 - 640x480 16 color graphics (VGA)
19 - 320x200 256 color graphics (VGA)
<bx> BX value for some extended graphic modes
<width> width for extended graphic modes
<height> height for extended graphic modes
returns T, or NIL if fails
XLISP 2.1e ADDITIONAL FUNCTIONS Page 84
ADDITIONAL FUNCTIONS AND UTILITIES
STEP.LSP
This file contains a simple Lisp single-step debugger. It started as an
implementation of the "hook" example in chapter 20 of Steele's "Common
Lisp". This version was brought up on Xlisp 1.7 for the Amiga, and then on
VAXLISP.
To invoke: (step (whatever-form with args))
For each list (interpreted function call), the stepper prints the
environment and the list, then enters a read-eval-print loop. At this point
the available commands are:
(a list)<CR> evaluate the list in the current environment, print the
result, and repeat.
<CR> step into the called function
anything_else<CR> step over the called function.
If the stepper comes to a form that is not a list it prints the form and
the value, and continues on without stopping.
Note that stepper commands are executed in the current environment. Since
this is the case, the stepper commands can change the current environment.
For example, a SETF will change an environment variable and thus can alter
the course of execution.
Global variables - newline, *hooklevel*
Functions/macros - while step eval-hool-function step-spaces step-flush
Note -- an even more powerful stepper package is in stepper.lsp (documented
in stepper.doc).
XLISP 2.1e ADDITIONAL FUNCTIONS Page 85
PP.LSP
In addition to the pretty-printer itself, this file contains a few
functions that illustrate some simple but useful applications.
(pp <object> [<stream>]) PRETTY PRINT EXPRESSION
(pp-def <funct> [<stream>]) PRETTY PRINT FUNCTION/MACRO
(pp-file <file> [<stream>]) PRETTY PRINT FILE
<object> The expression to print
<funct> Function to print (as DEFUN or DEFMACRO)
<file> File to print (specify either as string or quoted symbol)
<stream> Output stream (default is *standard-output*)
returns T
Global variables: tabsize maxsize miser-size min-miser-car max-normal-car
Functions/Macros: sym-function pp-file pp-def make-def pp pp1 moveto spaces
pp-rest-across pp-rest printmacrop pp-binding-form pp-do-form
pp-defining-form pp-pair-form
See the source file for more information.
XLISP 2.1e ADDITIONAL FUNCTIONS Page 86
REPAIR.LSP
This file contains a structure editor.
Execute
(repair 'symbol) to edit a symbol.
(repairf symbol) to edit the function binding of a symbol (allows
changing the argument list or function type, lambda or
macro).
The editor alters the current selection by copying so that aborting all
changes is generally posible; the exception is when editing a closure, if
the closure is BACKed out of, the change is permanent.
For all commands taking a numeric argument, the first element of the
selection is the 0th (as in NTH function).
Any array elements become lists when they are selected, and return to
arrays upon RETURN or BACK commands.
Do not create new closures, because the environment will be incorrect.
Closures become LAMBDA or MACRO expressions as the selection. Only the
closure body may be changed; the argument list cannot be successfully
modified, nor can the environment.
For class objects, only the methods and message names can be modified. For
instance objects, instance variables can be examined (if the object
under-stands the message :<ivar> for the particular ivar), and changed (if
:SET-IVAR is defined for that class, as it is if CLASSES.LSP is used).
(command list on next page)
XLISP 2.1e ADDITIONAL FUNCTIONS Page 87
COMMANDS (general):
? list available commands for the selection.
RETURN exit, saving all changes.
ABORT exit, without changes.
BACK go back one level (as before CAR CDR or N commands).
B n go back n levels.
L display selection using pprint; if selection is symbol, give
short description.
MAP pprints each element of selection, or if selection is symbol
then gives complete description of properties.
PLEV x set *print-level* to x. (Initial default is
*rep-print-level*)
PLEN x set *print-length to x. (Initial default is
*rep-print-length*)
EVAL x evaluates x and prints result. The symbol @ is bound to the
selection.
REPLACE x replaces the current selection with evaluated x. The symbol
@ is bound to the selection.
COMMANDS (if selection is symbol):
VALUE edit the value binding.
FUNCTION edit the function binding (must be a closure).
PROP x edit property x.
COMMANDS (if selection is list):
CAR select the CAR of the current selection.
CDR select the CDR of the current selection.
n where n is small non-negative integer, changes current
selection to (NTH n list).
SUBST x y all occurances of (quoted) y are replaced with (quoted) x.
EQUAL is used for the comparison.
RAISE n removes parenthesis surrounding nth element of selection.
LOWER n m inserts parenthesis starting with the nth element, for m
elements.
ARRAY n m as in LOWER, but makes elements into an array.
I n x inserts (quoted) x before nth element in selection.
R n x replaces nth element in selection with (quoted) x.
D n deletes nth element in selection.
All function names and global variables start with the string "rep-" or
"*rep-*".
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 88
BUG FIXES AND EXTENSIONS
In this section, CL means "Common Lisp compatible to the extent possible".
CX means "now works with complex numbers". CR means "now works with
ratios". * means "implemented in LISP rather than C". # means
"implementation moved from LISP to C".
Bug Fixes
RESTORE did not work -- several bugs for 80x86 systems. Only one restore
would work per session -- all systems.
:downcase for variable *printcase* did not work with some compilers.
Modifications to make the source acceptable to ANSI C compilers.
Values for ADEPTH and EDEPTH changed to more reasonable values -- before
this change the processor stack would overflow first, causing a crash.
On systems with 16 bit integers: STRCAT crashes when aggregate size of
argument strings were greater than 32k. MAKE-ARRAY crashes on too-large
arrays. DOTIMES, AREF, AREF and NTH place forms of SETF,
MAKE-STRING-INPUT-STREAM and GET-OUTPUT-STREAM-STRING treat numeric
argument modulo 65536. MAKE-STRING-INPUT-STREAM did not check for
start>end.
Strings containing nulls could not be read or printed.
NTH and NTHCDR failed for zero length lists.
Unnamed streams did not survive garbage collections.
(format nil ...) did not protect from garbage collection the unnamed stream
it creates.
SORT did not protect some pointers from garbage collection.
SYMBOL-NAME SYMBOL-VALUE SYMBOL-PLIST BOUNDP and FBOUNDP failed with symbol
NIL as argument.
LAST returned wrong value when its argument list ended with a dotted pair.
*gc-hook* was not rebound to NIL during execution of gchook function,
causing potential infinite recursion and crash.
Executing RETURN from within a DOLIST or DOTIMES caused the environment to
be wrong.
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 89
When errors occured during loading, which were not caught, the file would
be left open. EVAL and LOAD did not use global environment. EVALHOOK's
default environment was not global.
Invalid symbols (those containing control characters, for instance), can no
longer be created with intern and make-symbol.
The key T, meaning "otherwise" in the CASE function used to be allowed in
any position. Now it only means "otherwise" when used as the last case.
The lexical and functional environment of send of :answer (which defines a
new method) are now used during the method's evaluation, rather than the
global environment.
Signatures added for WKS files so that invalid ones will be rejected.
Checks added for file names and identifier names being too long.
Indexing code fixed to allow almost 64k long strings in 16 bit systems. It
is no longer possible to allocate arrays or strings that are too long for
the underlying system.
Circularity checks added to PRINT LAST BUTLAST LENGTH MEMBER and MAP
functions. An error is produced for all but MEMBER, which will execute
correctly.
Code for SETF modified so that a Common Lisp compatible DEFSETF could be
used.
User Interface Changes
-w command line argument to specify alternate or no workspace.
-b command line argument for batch operation.
-? command line argument gives usage message.
init.lsp not loaded if workspace loaded.
Search path can be provided for workspaces and .lsp files.
Standard input and output can be redirected. *TERMINAL-IO* stream added
which is always bound to console (stderr).
Non-error messages are sent to *DEBUG-IO* so they don't clutter
*STANDARD-OUTPUT*
Results of evaluations are printed on a fresh line rather than at the end
of the preceeding line (if any). This enhances readability.
Display writes are buffered.
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 90
Character literals available for all 256 values. CL
Uninterned symbols print with leading #:. CL
PRIN1 generates appropriate escape sequences for control and meta
characters in strings. CL
Read macro #. added. CL
Lisp code for nested backquote macros added. CL
Read macro #C added for complex numbers. CL
Semantics for #S read macro changed so that it can read in structures
written by PRINT. CL
PRINT of file streams shows file name, or "closed" if a closed file stream.
*PRINT-CASE* now applies to PRINC. CL
Added *READTABLE-CASE* to control case conversion on input and output,
allowing case sensitive code. CL-like
Reader macros #+ and #- added, along with global variable *FEATURES*. CL
New/Changed Data Types
NIL -- was treated as a special case, now just a normal symbol.
symbols -- value binding can optionally be constant or special.
ratio numbers -- new type.
complex numbers -- new type, can be integer or real.
character strings -- The ASCII NUL (code 0) is now a valid character.
objects -- objects of class Class have a new instance variable which is the
print name of the class.
hash-table -- new type, close to CL
random-state -- new type, CL
Property list properties are no longer limited to just symbols CL
New Variables and Constants
*apply-hook* Now activated
*displace-macros* Macros are replaced with their expansions when possible
*dos-input* MSDOS only, uses DOS interface to interact with user.
Allows recall of earlier command(s).
*print-level* CL
*print-length* CL
*random-state* CL
*ratio-format*
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 91
*readtable-case* CL-like
*terminal-io* CL
internal-time-units-per-second CL
pi CL
New functions
ACONS CL*
ACOSH CL*
ADJOIN CL
ALPHA-CHAR-P CL
APPLYHOOK CL
ASH CL
ASINH CL*
ATANH CL*
BUTLAST CL
CEILING CL
CIS CL*
CLREOL (clear to end of line -- MS/DOS only)
CLRHASH CL
CLS (clear screen -- MS/DOS only)
COERCE CL
COLOR (graphics -- MS/DOS only)
COMPLEX CL
COMPLEXP CL
CONCATENATE CL
CONJUGATE CL
CONSTANTP CL
COPY-ALIST CL*
COPY-LIST CL*
COPY-TREE CL*
COSH CL*
COUNT-IF CL except no :from-end
DECF CL*
DEFCLASS * (define a new class)
DEFINST * (define a new instance)
DEFMETHOD * (define a new method)
DEFSETF CL*
DELETE-FILE CL
DENOMINATOR CL
DRAW (graphics -- MS/DOS only)
DRAWREL (graphics -- MS/DOS only)
ELT CL
EQUALP CL*
EVERY CL
FILE-LENGTH CL
FILE-POSITION CL
FILL CL*
FIND-IF CL except no :from-end
FLOOR CL
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 92
FRESH-LINE CL
FUNCTIONP CL*
GENERIC (implementation debugging function)
GET-INTERNAL-REAL-TIME CL
GET-INTERNAL-RUN-TIME CL
GETHASH CL
GOTO-XY (position cursor -- MS/DOS only)
HASH-TABLE-COUNT CL
IDENTITY CL*
IMAGPART CL
INCF CL*
INPUT-STREAM-P CL
INTERSECTION CL
LCM CL
LIST* CL
LOG CL
LOGTEST CL*
MAKE-HASK-TABLE CL
MAKE-RANDOM-STATE CL
MAP CL
MAPHASH CL
MODE (graphics -- MS/DOS only)
MOVE (graphics -- MS/DOS only)
MOVEREL (graphics -- MS/DOS only)
NINTERSECTION CL*
NOTANY CL
NOTEVERY CL
NREVERSE CL
NSET-DIFFERENCE CL*
NSET-EXCLUSIVE-OR CL*
NUMERATOR CL
NUNION CL*
OPEN-STREAM-P CL
OUTPUT-STREAM-P CL
PAIRLIS CL*
PHASE CL
POP CL*
POSITION-IF CL except no :from-end
PUSH CL*
PUSHNEW CL*
RATIONAL CL
RATIONALP CL
REALPART CL
REDUCE CL except no :from-end
REMHASH CL
REMOVE-DUPLICATES CL except no :from-end
REPLACE CL*
ROUND CL
SEARCH CL except no :from-end
SET-DIFFERENCE CL
SET-EXCLUSIVE-OR CL*
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 93
SETF Placeform ELT CL
SETF Placeform GETHASH CL
SETF Placeform SEND* (set instance variable)
SIGNUM CL*
SINH CL*
SOME CL
SUBSETP CL
TANH CL*
TIME CL
TRUENAME CL
TYPEP CL
UNINTERN CL*
UNION CL
WITH-INPUT-FROM-STRING CL*
WITH-OPEN-FILE CL*
WITH-OUTPUT-TO-STRING CL*
Y-OR-N-P CL*
Changed functions
&ALLOW-OTHER-KEYS CL (now functions, is no longer ignored)
* CL CR CX (with no arguments, returns 1)
+ CL CR CX (with no arguments, returns 0)
- CL CR CX
/ CL CR CX
1+ CL CR CX
1- CL CR CX
ABS CL CR CX
ACOS CL CR CX
ALLOC (new optional second argument)
APPLY CL (allows multiple arguments)
AREF CL (now works on strings)
ASIN CL CR CX
ASSOC CL (added :key)
ATAN CL CR CX (second argument now allowed)
CHAR-CODE CL (parity bit is stripped)
CLOSE CL (will close unnamed stream strings)
COS CL CR CX
DEFCONSTANT CL# (true constants)
DEFPARAMETER CL# (true special variables)
DEFSTRUCT (added option :print-function)
DEFVAR CL# (true special variables)
DELETE (added keywords :key :start :end. Works on arrays and strings)
DELETE-IF (added keywords :key :start :end. Works on arrays and strings)
DELETE-IF-NOT (added keywords :key :start :end. Works on arrays and
strings)
EXP CL CR CX
EXPT CL CR CX
FORMAT (added directives ~D ~E ~F ~G ~& ~T ~\N and lowercase directives)
HASH (hashes everything, not just symbols or strings)
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 94
LOAD CL (uses path to find file, allows file stream for name argument)
LOGAND CL (with no arguments, returns -1)
LOGIOR CL (with no arguments, returns 0)
LOGXOR CL (with no arguments returns 0)
MAKE-STRING-INPUT-STREAM CL (:end NIL means end of string)
MAKUNBOUND #
MAPCAN #
MAPCON #
MEMBER CL (added :key)
NSTRING-DOWNCASE CL (string argument can be symbol, :end NIL means end of
string)
NSTRING-UPCASE CL (string argument can be symbol, :end NIL means end of
string)
OPEN CL (many additional options, as in Common Lisp)
PEEK (fixnum sized location is fetched)
PEEK-CHAR CL (input stream NIL is *standard-input*, T is *terminal-io*)
POKE (fixnum sized location is stored)
PPRINT (output stream NIL is *standard-output*, T is *terminal-io*)
PRIN1 CL (output stream NIL is *standard-output*, T is *terminal-io*)
PRINC CL (output stream NIL is *standard-output*, T is *terminal-io*)
PRINT (output stream NIL is *standard-output*, T is *terminal-io*)
RANDOM CL (works with random-states)
READ (input stream NIL is *standard-input*, T is *terminal-io*)
READ-BYTE CL (input stream NIL is *standard-input*, T is *terminal-io*)
READ-CHAR CL (input stream NIL is *standard-input*, T is *terminal-io*)
READ-LINE CL (input stream NIL is *standard-input*, T is *terminal-io*)
REM CR CL (only two arguments now allowed, may be floating point)
REMOVE (added keywords :key :start :end. Works on arrays and strings)
REMOVE-IF (added keywords :key :start :end. Works on arrays and strings)
REMOVE-IF-NOT (added keywords :key :start :end. Works on arrays and
strings)
RESTORE (uses path to find file, restores file streams, fine name argument
may be file stream)
REVERSE CL (works on arrays and strings)
SAVE (file name argument may be file stream)
SIN CL CR CX
SORT (added :key)
SQRT CL CR CX
STRCAT * (now a macro, use of CONCATENATE is recommended)
STRING-comparisonFunctions CL (string arguments can be symbols)
STRING-DOWNCASE CL (string argument can be symbol, :end NIL means end of
string)
STRING-LEFT-TRIM CL (string argument can be symbol)
STRING-RIGHT-TRIM CL (string argument can be symbol)
STRING-TRIM CL (string argument can be symbol)
STRING-UPCASE CL (string argument can be symbol, :end NIL means end of
string)
SUBLIS CL (modified to do minimum copying)
SUBSEQ CL (works on arrays and lists)
SUBST CL (modified to do minimum copying)
TAN CL CR CX
XLISP 2.1e BUG FIXES AND EXTENSIONS Page 95
TERPRI CL (output stream NIL is *standard-output*, T is *terminal-io*)
TRUNCATE CR CL (allows denominator argument)
TYPE-OF (returns HASH-TABLE for hashtables, COMPLEX for complex, and LIST
for NIL)
UNTRACE CL (with no arguments, untraces all functions)
WRITE-BYTE CL (output stream NIL is *standard-output*, T is *terminal-io*)
WRITE-CHAR CL (output stream NIL is *standard-output*, T is *terminal-io*)
New messages for class Object
:prin1 <stream>
:superclass *
:ismemberof <cls> *
:iskindof <cls> *
:respondsto <selector> *
:storeon (returns form that will create a copy of the object) *
New messages for class Class
:superclass *
:messages *
:storeon (returns form that will recreate class and methods) *
XLISP 2.1e EXAMPLES Page 96
EXAMPLES: FILE I/O FUNCTIONS
Input from a File
To open a file for input, use the OPEN function with the keyword argument
:DIRECTION set to :INPUT. To open a file for output, use the OPEN function
with the keyword argument :DIRECTION set to :OUTPUT. The OPEN function
takes a single required argument which is the name of the file to be
opened. This name can be in the form of a string or a symbol. The OPEN
function returns an object of type FILE-STREAM if it succeeds in opening
the specified file. It returns the value NIL if it fails. In order to
manipulate the file, it is necessary to save the value returned by the OPEN
function. This is usually done by assigning it to a variable with the SETQ
special form or by binding it using LET or LET*. Here is an example:
(setq fp (open "init.lsp" :direction :input))
Evaluating this expression will result in the file "init.lsp" being opened.
The file object that will be returned by the OPEN function will be assigned
to the variable "fp".
It is now possible to use the file for input. To read an expression from
the file, just supply the value of the "fp" variable as the optional
"stream" argument to READ.
(read fp)
Evaluating this expression will result in reading the first expression from
the file "init.lsp". The expression will be returned as the result of the
READ function. More expressions can be read from the file using further
calls to the READ function. When there are no more expressions to read, the
READ function will return NIL (or whatever value was supplied as the second
argument to READ).
Once you are done reading from the file, you should close it. To close the
file, use the following expression:
(close fp)
Evaluating this expression will cause the file to be closed.
XLISP 2.1e EXAMPLES Page 97
Output to a File
Writing to a file is pretty much the same as reading from one. You need to
open the file first. This time you should use the OPEN function to indicate
that you will do output to the file. For example:
(setq fp (open "test.dat" :direction :output :if-exists :supersede))
Evaluating this expression will open the file "test.dat" for output. If the
file already exists, its current contents will be discarded. If it doesn't
already exist, it will be created. In any case, a FILE-STREAM object will
be returned by the OPEN function. This file object will be assigned to the
"fp" variable.
It is now possible to write to this file by supplying the value of the "fp"
variable as the optional "stream" parameter in the PRINT function.
(print "Hello there" fp)
Evaluating this expression will result in the string "Hello there" being
written to the file "test.dat". More data can be written to the file using
the same technique.
Once you are done writing to the file, you should close it. Closing an
output file is just like closing an input file.
(close fp)
Evaluating this expression will close the output file and make it
permanent.
A Slightly More Complicated File Example
This example shows how to open a file, read each Lisp expression from the
file and print it. It demonstrates the use of files and the use of the
optional "stream" argument to the READ
function.
(do* ((fp (open "test.dat" :direction :input))
(ex (read fp) (read fp)))
((null ex) (close fp) nil)
(print ex))
The file will be closed with the next garbage collection.
XLISP 2.1e INDEX Page 98
INDEX
:answer 20 :supersede 72
:append 72 :test 27, 31, 34-36,
:class 19 39-41, 59
:conc-name 53 :test-not 27, 34-36,
:constituent 12 39-41, 59
:create 72 :tmacro 12
:direction 72 :upcase 14
:downcase 14 :verbose 79
:element-type 72 :white-space 12
:end 34-36, 49, 74 + 23, 44
:end1 34, 37, 50 ++ 23
:end2 34, 37, 50 +++ 23
:error 72 - 23, 44
:if-does-not-exist 72 * 23, 44
:if-exists 72 ** 23
:include 53 *** 23
:initial-value 36 *applyhook* 8, 22
:input 72 *breakenable* 4, 22
:invert 14 *debug-io* 22
:io 72 *displace-macros* 7, 23
:iskindof 19 *dos-input* 2, 23
:ismemberof 19 *error-output* 22
:isnew 19, 20 *evalhook* 8, 22
:key 27, 34-36, 39-42, 59 *features* 13, 23
:mescape 12 *float-format* 23, 67
:messages 20 *gc-flag* 23
:new 20 *gc-hook* 8, 23
:new-version 72 *integer-format* 23, 67
:nmacro 12 *obarray* 22
:output 72 *print-case* 14, 23, 67
:overwrite 72 *print-length* 23, 67
:preserve 14 *print-level* 23, 67
:prin1 19 *random-state* 23
:print 79 *ratio-format* 23, 67
:print-function 53 *readtable-case* 14, 23, 67
:probe 72 *readtable* 12, 22
:rename 72 *standard-input* 22
:rename-and-delete 72 *standard-output* 22
:respondsto 19 *struct-slots* 53
:sescape 12 *terminal-io* 22
:set-ivar 55 *trace-output* 22
:set-pname 55 *tracelimit* 4, 22
:show 19 *tracelist* 22
:size 31 *tracenable* 4, 22
:start 34-36, 49, 74 *unbound* 22
:start1 34, 37, 50 / 44
:start2 34, 37, 50 /= 47
:storeon 19, 20 < 47
:superclass 19, 20 <= 47
XLISP 2.1e INDEX Page 99
= 47 char-lessp 52
> 47 char-not-equal 52
>= 47 char-not-greaterp 52
&allow-other-keys 16 char-not-lessp 52
&aux 16 char-upcase 51
&key 16 char/= 52
&optional 16 char< 52
&rest 16 char<= 52
1+ 44 char= 52
1- 44 char> 52
abs 45 char>= 52
acons 38 CHARACTER 81
acos 45 characterp 58
acosh 46 cis 46
address-of 82 class 22
adjoin 41 classp 58
alloc 80 clean-up 3, 77
alpha-char-p 51 clean-up, 4
and 60, 61 close 73
append 38 CLOSURE 81
apply 24 clrhash 31
applyhook 8, 78 cls 82
aref 26, 32 code-char 51
ARRAY 81 coerce 81
arrayp 58 color 83
ash 48 comma 24
asin 45 comma-at 24
asinh 46 complex 47, 81
assoc 39 complexp 58
atan 45 concatenate 33
atanh 46 cond 61
atom 57, 60 conjugate 47
backquote 24 cons 38, 81
baktrace 77 consp 57
block 65 constantp 57
both-case-p 51 continue 3, 4, 77
boundp 58 copy-alist 40
break 77 copy-list 40
butlast 38 copy-tree 41
car 26, 38 cos 45
case 62 cosh 46
catch 62 count-if 35
cdr 26, 38 cxxr 38
ceiling 43 cxxxr 38
cerror 77 cxxxxr 38
char 51 debug 78
char-code 51 decf 28
char-downcase 51 defclass 55
char-equal 52 defconstant 29
char-greaterp 52 definst 56
char-int 52 defmacro 28
XLISP 2.1e INDEX Page 100
defmethod 55 fmakunbound 29
defparameter 29 format 69
defsetf 27 fourth 38
defstruct 53 fresh-line 68
defun 28 FSUBR 81
defvar 29 funcall 24
delete 35 function 24, 60
delete-file 73 functionp 59
delete-if 36 gc 80
delete-if-not 36 gcd 45
denominator 46 generic 82
digit-char 52 gensym 28
digit-char-p 51 get 26, 30
do 64 get-internal-real-time 81
do* 64 get-internal-run-time 81
dolist 64 get-key 82
dotimes 64 get-lambda-expression 25
draw 83 get-macro-character 67
drawrel 83 get-output-stream-list 75
dribble 80 get-output-stream-string 75
elt 26, 33 gethash 26, 31
endp 57 go 65
eq 60 goto-xy 83
eql 60 hash 28
equal 60 HASH-TABLE 81
equalp 60 hash-table-count 31
error 77 identity 24
errset 4, 77 if 61
eval 24 imagpart 47
evalhook 8, 78 incf 28
evenp 59 input-stream-p 58
every 33 int-char 52
exit 82 integerp 57
exp 46 intern 28
expand 80 internal-time-units-per-second
expt 46 22
fboundp 59 intersection 41
file-length 73 labels 62
file-position 74 lambda 25
FILE-STREAM 81 last 38
fill 36 lcm 45
find-if 35 length 33
first 38 let 62
FIXNUM 81 let* 62
flatc 68 list 38, 60, 81
flatsize 68 list* 38
flet 62 listp 57
float 43 load 79
floatp 57 log 46
FLONUM 81 logand 48
floor 43 logior 48
XLISP 2.1e INDEX Page 101
lognot 48 objectp 58
logtest 48 oddp 59
logxor 48 open 72
loop 64 open-stream-p 58
lower-case-p 51 or 60, 61
macroexpand 25 output-stream-p 58
macroexpand-1 25 pairlis 40
macrolet 62 peek 81
make-array 32 peek-char 71
make-hash-table 31 phase 47
make-random-state 45 pi 22
make-string-input-stream 75 plusp 59
make-string-output-stream 75 poke 81
make-symbol 28 pop 27
makunbound 29 position-if 35
map 33 pp 85
mapc 39 pprint 68
mapcan 40 prin1 67
mapcar 39 princ 68
mapcon 40 print 67
maphash 31 prog 65
mapl 39 prog* 65
maplist 39 prog1 66
max 44 prog2 66
member 39, 60 progn 66
min 44 progv 65
minusp 59 psetq 26
mod 44 push 27
mode 83 pushnew 27
move 83 putprop 30
moverel 83 quote 24
nconc 42 random 45
NIL 22 RATIO 81
nintersection 41 RATIONAL 60
nodebug 78 rationalp 58
not 57, 60 read 67
notany 33 read-byte 73
notevery 33 read-char 71
nreverse 33 read-line 71
nset-difference 41 realpart 47
nset-exclusive-or 41 reduce 36
nstring-downcase 49 rem 44
nstring-upcase 49 remhash 31
nth 26, 39 remove 34
nthcdr 39 remove-duplicates 36
null 57, 60 remove-if 34
NUMBER 60 remove-if-not 34
numberp 57 remprop 30
numerator 46 repair 86
nunion 41 repairf 86
object 22, 60, 81 replace 37
XLISP 2.1e INDEX Page 102
rest 38 STRUCT 60
restore 79 sublis 40
return 65 SUBR 81
return-from 65 subseq 34
reverse 33 subsetp 59
room 80 subst 40
round 43 SYMBOL 81
rplaca 42 symbol-function 26, 28
rplacd 42 symbol-name 28
satisfies 60 symbol-plist 26, 28
save 79 symbol-value 26, 28
search 34 symbolp 57
second 38 system 82
self 18, 22 t 22
send 18, 26, 55 tagbody 65
send-super 18, 55 tan 45
set 26 tanh 46
set-difference 41 terpri 68
set-exclusive-or 41 third 38
set-macro-character 67 throw 62
setf 26 time 80
setq 26 top-level 3, 77
signum 45 trace 77
sin 45 truename 73
sinh 46 truncate 43
some 33 type-of 81
sort 42 typep 60
sqrt 46 union 41
step 84 unless 61
strcat 50 UNNAMED-STREAM 81
STREAM 60 untrace 77
streamp 58 unwind-protect 63
string 49, 81 upper-case-p 51
string-downcase 49 vector 32
string-equal 50 when 61
string-greaterp 50 with-input-from-string 75
string-left-trim 49 with-open-file 73
string-lessp 50 with-output-to-string 76
string-not-equal 50 write-byte 73
string-not-greaterp 50 write-char 71
string-not-lessp 50 y-or-n-p 68
string-right-trim 49 zerop 59
string-trim 49
string-upcase 49
string/= 50
string< 50
string<= 50
string= 50
string> 50
string>= 50
stringp 58